zstar 110 problems!! - Page 2

FLASHLIGHTBOY · 05-29-2011, 10:27 PM

you should move the carb needle up 1 notch.. there is a sticky on this.. this will help it start better..

rotax583 · 05-30-2011, 09:41 PM

thanks for heads up!!! i had one stop after 15 minutes of riding,pull the line at the carb and it was dry.I replaced the filter and it ran fine after.alot of little things to change on the next batch before they go out.

05-29-2011, 10:27 PM	#16
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	starting problem you should move the carb needle up 1 notch.. there is a sticky on this.. this will help it start better.. __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0

05-30-2011, 09:41 PM	#17
rotax583 Join Date: Jun 2010 Posts: 121	thanks for heads up!!! i had one stop after 15 minutes of riding,pull the line at the carb and it was dry.I replaced the filter and it ran fine after.alot of little things to change on the next batch before they go out.
	0