11-15-2016, 09:39 AM | #1 |
Join Date: Sep 2016
Location: St Catharines, ontario, Canada
Posts: 7
|
My Second Chinese ATV Better mods
I liked the cvt cooler on the red one so this time I went a little crazy
CVT AND CARB SNORKEL Breather lines and vent lines ran higer 12" RIMS 25" TIRES New CARB Wheel Spacers front and rear Anyone Know what size Rear sprocket I should go to? 48tooth? What size front I know it may not work as a plow but wanted to try lol. |
|
11-15-2016, 11:34 AM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I like the snorkel idea. Interesting idea to combine the cool air for the CVT with the fresh air for the intake.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
11-15-2016, 11:36 AM | #3 |
Join Date: Sep 2016
Location: St Catharines, ontario, Canada
Posts: 7
|
Here was the thought process.....The Varaitor is sucking in air so that should help to make sure there is enough for the Carb. I'm 50/50 on the filter so far. I seem to have a slight bog on throttle. I replaced the plug so I can see the color change in a few days. I almost think I'm running rich, which isn't the worst problem to have but I may not be getting enough air to lean it out.
|
|
11-15-2016, 12:20 PM | #4 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
I like the minimal plastics. Did you trim the plastics or is that factory?
/ |
|
11-15-2016, 12:24 PM | #5 |
Join Date: Sep 2016
Location: St Catharines, ontario, Canada
Posts: 7
|
Its trimmed
|
|
11-16-2016, 11:28 AM | #6 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
If you can figure out how to attach your blade hardware to the rear axle, you'll have an easier time plowing. The blade support bar for a quad is typically quite long; you drive over it and connect it to the rear axle. That way, when you encounter resistance, the front wheels will unload and the rears will dig in. When the blade is mounted under the front suspension, the opposite effect occurs.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|