New Member Awaiting Rhino 250

justin1328 · 01-04-2020, 06:15 PM

Hello all, I am a new member awaiting a new Rhino 250 ordered today (1.4.20)

. First off, great community! I have been browsing, researching and learning for the past two weeks, thanks to all of you! I am expecting my new Rhino 250 in the next week or so. Anyway, in anticipation of my new toy I am trying to get prepared for assembly and break in. So I am placing an order for a quart of Royal Purple break in oil to replace the factory oil for the first break in period. My question is has anyone had any experience with Amazon Basics 5-40 full synthetic? I was going to order the Rotella 5-40 and this was suggested by Amazon as an option ( of course ) but it is half the price as the Rotella.. I know you get what you pay for but, but Amazon us usually rebranded something else.... and my budget is limited to a degree as I have kids ready for college and I am trying to save some funds for additional upgrades / mods.... Any input is appreciated and I am looking forward to contributing in the near future!

**JerryHawk250** · 01-04-2020, 07:35 PM

Welcome aboard and enjoy the new Rhino when you get it.

JSTOH · 01-05-2020, 02:09 AM

I still haven't completely broken mine in from a few months ago. I've been using non-syn Rotella T4 for break in and will switch to the Rotella T6 (I think) for regular use. I'm going to check out the Amazon brand and if it has the wet clutch specs I'll probably use that instead.

George_NJ · 01-06-2020, 08:21 PM

Hi Justin, I'm from the top west of the state in the snow belt. I've beat the piss out of mine plowing heavy wet snow, dragging downed trees & riding it for fun. I bought mine new already assembled but have been running the synthetic oil. I've been very happy with my Rhino. I did change the front sprocket & chain to get the lower end power for plowing, added extra safety lighting but other than that it's stock. This is my second winter plowing with it.

What do you plan to use yours for, fun, work or both?

justin1328 · 01-07-2020, 12:57 PM

Thank you all for the warm welcome.

George, Thank you for the input, very helpful. I am planning on using my Rhino for a little work and a little fun, as well as all the wrenching that comes along with owning these machines. Already ordered a 12 T front sprocket, not sure of chain size yet, trying to figure out how to calculate the correct chain size. Ordered 2in spacers for the back. Picked up a HF winch and NGK's 4929 DPR8EA-9. What did you use to mount your plow? Thank you!

justin1328 · 01-07-2020, 06:28 PM

So as I mentioned at top of this thread I ordered my Rhino on 1/4/2020 and was told it was in stock and would be delivered to my location in 2 -4 business days. I know this seems pretty quick compared to many online dealers promising 6-15 days. Anyway, I ordered from Birdy’s Scooters and ATV's in Indy, who had an A+BBB rating. Dealt with Joe who promised the above. I reached out to him end of day yesterday and he said it should have shipped out yesterday and that he was out of the office and would confirm with me today (Tuesday 1.7). No call as of 3:30pm, I called Joe and he stated that he ran out to do an errand and as soon as he got back in to the office he would check on the status and provide me an update and tracking info. 6:30pm nothing...... Starting to think he is blowing smoke... A little back story, After calling 6-7 distributors all telling me that the Rhino is our of stock until late Feb early March Birdy’s told me they had Blue ones in stock... I specifically stated in my order notes that I was told the unit in stock and I did not want to proceed with the order if it was not. Anyone here ever hear or dealt with Birdy’s? I am I being to anxious or do you think this establishment is blowing smoke or stalling until they receive their new inventory from China? Thank you everyone for your input.

Darth Racer · 01-07-2020, 07:05 PM

Never dealt with them so hard to say what's up.. could just be he just arranges for it to be drop shipped. He has a good rating so is most likely legit... your only into the 3rd day at this point... honestly 7 days is a fair amount of time. He may be in the midst of working it out with a fellow dealer or another distributor.

Could just be an issue with the transport company... if you ever had anything shipped you know in the end you are at the shippers mercy. Heavy freight companies aren't any better.

Sure soon enough you will be riding your Rhino and will forget about the wait.

I'm impatient too with internet order.... something I have had to learn to deal with over the years.

SevereTrauma · 01-07-2020, 07:58 PM

I've never used Birdys but my neighbor bought two from there (one transaction) and he was very happy with them. This was probably 2-3 years ago give or take.

david3921 · 01-07-2020, 11:04 PM

I bought 2 from them and didn't have any problems. Unless something has changed in the last couple of years, you should have your Rhino soon.

George_NJ · 01-08-2020, 08:01 AM

"What did you use to mount your plow?"

I bought the 60" Moose plow used but practically new for $200, I bought the mounting plate for $40 off ebay and welded it to the frame underneath the Rhino & used Harbor Freight winch to raise and lower it.

Here is my thread about it; http://www.chinariders.net/showthread.php?t=21115

justin1328 · 01-08-2020, 08:12 AM

Quote:

Originally Posted by Darth Racer

Never dealt with them so hard to say what's up.. could just be he just arranges for it to be drop shipped. He has a good rating so is most likely legit... your only into the 3rd day at this point... honestly 7 days is a fair amount of time. He may be in the midst of working it out with a fellow dealer or another distributor.

Could just be an issue with the transport company... if you ever had anything shipped you know in the end you are at the shippers mercy. Heavy freight companies aren't any better.

Sure soon enough you will be riding your Rhino and will forget about the wait.

I'm impatient too with internet order.... something I have had to learn to deal with over the years.

Darth, Thank you. I don’t want to be "that guy", and I know 4 days is nothing, it’s the lack of communication and dodging from Birdys that is making me a little suspicious. I will chill out and give them to the end of the week. Thank you and everyone for the replies.

justin1328 · 01-08-2020, 08:17 AM

George, Thank you. Looking to make this a fall project so I am ready for next winter.

justin1328 · 01-08-2020, 08:23 PM

Finally received shipping information. Delivery expected 1/14/20

Starting to feel like its Christmas morning when I was a kid.......

SevereTrauma · 01-08-2020, 08:30 PM

Congratulations. It will go by fast. Don't forget, pictures when you get it.

Darth Racer · 01-09-2020, 05:42 PM

Ok so not too bad... it's on it's way... cool.

Brush up on some of the threads here that talk about putting it together... the fender flares can be tricky... I have a thread on it http://www.chinariders.net/showthread.php?p=215343. Throw the wrenches out that come with it.. they are useless.

Get a small bottle of BLUE Loctite

Drain the stir fry oil out of the crankcase and replace with 15/40 Rotella oil. Get a couple of quarts. It's good to change out the oil after the first break in run (4hrs of riding or so) Clean off the bits of metal from the magnet on the drain plug

Pick up a couple of NGK spark plugs.. it will start easier

Clean out an area of the garage to do the assembly in

It's winter now... don't leave that battery out in the cold or it wont last long at all.

01-04-2020, 06:15 PM	#1
justin1328 Join Date: Dec 2019 Location: Somers Point, NJ Posts: 37	New Member Awaiting Rhino 250 Hello all, I am a new member awaiting a new Rhino 250 ordered today (1.4.20). First off, great community! I have been browsing, researching and learning for the past two weeks, thanks to all of you! I am expecting my new Rhino 250 in the next week or so. Anyway, in anticipation of my new toy I am trying to get prepared for assembly and break in. So I am placing an order for a quart of Royal Purple break in oil to replace the factory oil for the first break in period. My question is has anyone had any experience with Amazon Basics 5-40 full synthetic? I was going to order the Rotella 5-40 and this was suggested by Amazon as an option ( of course ) but it is half the price as the Rotella.. I know you get what you pay for but, but Amazon us usually rebranded something else.... and my budget is limited to a degree as I have kids ready for college and I am trying to save some funds for additional upgrades / mods.... Any input is appreciated and I am looking forward to contributing in the near future!
	0

01-04-2020, 07:35 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Welcome aboard and enjoy the new Rhino when you get it. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

01-06-2020, 08:21 PM	#4
George_NJ Join Date: Apr 2018 Location: New Jersey Posts: 41	Welcome! Hi Justin, I'm from the top west of the state in the snow belt. I've beat the piss out of mine plowing heavy wet snow, dragging downed trees & riding it for fun. I bought mine new already assembled but have been running the synthetic oil. I've been very happy with my Rhino. I did change the front sprocket & chain to get the lower end power for plowing, added extra safety lighting but other than that it's stock. This is my second winter plowing with it. What do you plan to use yours for, fun, work or both?
	0

01-07-2020, 12:57 PM	#5
justin1328 Join Date: Dec 2019 Location: Somers Point, NJ Posts: 37	Thank you all for the warm welcome. George, Thank you for the input, very helpful. I am planning on using my Rhino for a little work and a little fun, as well as all the wrenching that comes along with owning these machines. Already ordered a 12 T front sprocket, not sure of chain size yet, trying to figure out how to calculate the correct chain size. Ordered 2in spacers for the back. Picked up a HF winch and NGK's 4929 DPR8EA-9. What did you use to mount your plow? Thank you! Last edited by justin1328; 01-07-2020 at 04:26 PM. Reason: spelling
	0

01-07-2020, 06:28 PM	#6
justin1328 Join Date: Dec 2019 Location: Somers Point, NJ Posts: 37	Getting concerened So as I mentioned at top of this thread I ordered my Rhino on 1/4/2020 and was told it was in stock and would be delivered to my location in 2 -4 business days. I know this seems pretty quick compared to many online dealers promising 6-15 days. Anyway, I ordered from Birdy’s Scooters and ATV's in Indy, who had an A+BBB rating. Dealt with Joe who promised the above. I reached out to him end of day yesterday and he said it should have shipped out yesterday and that he was out of the office and would confirm with me today (Tuesday 1.7). No call as of 3:30pm, I called Joe and he stated that he ran out to do an errand and as soon as he got back in to the office he would check on the status and provide me an update and tracking info. 6:30pm nothing...... Starting to think he is blowing smoke... A little back story, After calling 6-7 distributors all telling me that the Rhino is our of stock until late Feb early March Birdy’s told me they had Blue ones in stock... I specifically stated in my order notes that I was told the unit in stock and I did not want to proceed with the order if it was not. Anyone here ever hear or dealt with Birdy’s? I am I being to anxious or do you think this establishment is blowing smoke or stalling until they receive their new inventory from China? Thank you everyone for your input.
	0

01-05-2020, 02:09 AM	#3
JSTOH Join Date: Nov 2019 Location: Western WA, Puget Sound Posts: 21	I still haven't completely broken mine in from a few months ago. I've been using non-syn Rotella T4 for break in and will switch to the Rotella T6 (I think) for regular use. I'm going to check out the Amazon brand and if it has the wet clutch specs I'll probably use that instead.
	0

01-07-2020, 07:05 PM	#7
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Never dealt with them so hard to say what's up.. could just be he just arranges for it to be drop shipped. He has a good rating so is most likely legit... your only into the 3rd day at this point... honestly 7 days is a fair amount of time. He may be in the midst of working it out with a fellow dealer or another distributor. Could just be an issue with the transport company... if you ever had anything shipped you know in the end you are at the shippers mercy. Heavy freight companies aren't any better. Sure soon enough you will be riding your Rhino and will forget about the wait. I'm impatient too with internet order.... something I have had to learn to deal with over the years.
	0

01-07-2020, 07:58 PM	#8
SevereTrauma Join Date: Oct 2019 Location: Tucson, AZ Posts: 85	I've never used Birdys but my neighbor bought two from there (one transaction) and he was very happy with them. This was probably 2-3 years ago give or take.
	0

01-07-2020, 11:04 PM	#9
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,043	I bought 2 from them and didn't have any problems. Unless something has changed in the last couple of years, you should have your Rhino soon. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

01-08-2020, 08:01 AM	#10
George_NJ Join Date: Apr 2018 Location: New Jersey Posts: 41	"What did you use to mount your plow?" I bought the 60" Moose plow used but practically new for $200, I bought the mounting plate for $40 off ebay and welded it to the frame underneath the Rhino & used Harbor Freight winch to raise and lower it. Here is my thread about it; http://www.chinariders.net/showthread.php?t=21115
	0

01-08-2020, 08:17 AM	#12
justin1328 Join Date: Dec 2019 Location: Somers Point, NJ Posts: 37	George, Thank you. Looking to make this a fall project so I am ready for next winter.
	1

01-08-2020, 08:23 PM	#13
justin1328 Join Date: Dec 2019 Location: Somers Point, NJ Posts: 37	Received Shipping Tracking Information Finally received shipping information. Delivery expected 1/14/20 Starting to feel like its Christmas morning when I was a kid.......
	3

01-08-2020, 08:30 PM	#14
SevereTrauma Join Date: Oct 2019 Location: Tucson, AZ Posts: 85	Congratulations. It will go by fast. Don't forget, pictures when you get it.
	0

01-09-2020, 05:42 PM	#15
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Ok so not too bad... it's on it's way... cool. Brush up on some of the threads here that talk about putting it together... the fender flares can be tricky... I have a thread on it http://www.chinariders.net/showthread.php?p=215343. Throw the wrenches out that come with it.. they are useless. Get a small bottle of BLUE Loctite Drain the stir fry oil out of the crankcase and replace with 15/40 Rotella oil. Get a couple of quarts. It's good to change out the oil after the first break in run (4hrs of riding or so) Clean off the bits of metal from the magnet on the drain plug Pick up a couple of NGK spark plugs.. it will start easier Clean out an area of the garage to do the assembly in It's winter now... don't leave that battery out in the cold or it wont last long at all.
	2