Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 02-22-2022, 08:27 AM   #1
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Angry 2020 Hawk DLX check engine light on

Hey y'all. I have a 2020 Hawk DLX that I've put around 1400 miles on. It's been a great bike so far. I went to go for a ride the other day and the check engine light would not go off and the bike was running rough. I can turn the switch on and off twice, then leave it on the third turn and the check engine light will throw a code of 0112. (The light flashes 10 times, then once, then once, then twice, pauses and repeats the code) I've messed with it for a few days and can't find the issue. It's driving me nuts, and I can't find any info specific to the hawk concerning this code. I could use some help here. I've changed the air filter, put a new NGK plug, greased all the connecters with electrical grease, cleaned the battery posts and put non corrosion grease on them and no results. Any suggestions?
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 09:10 AM   #2
Boatguy   Boatguy is offline
 
Boatguy's Avatar
 
Join Date: Feb 2021
Location: Northeast
Posts: 934
That code looks like it is for the intake air temperature sensor for all motorcycles. I would almost assume that that is a fairly standard code assignment. Certainly no harm in checking that first.
__________________
2020 Lifan x-pect


 
Reply With Quote
Old 02-22-2022, 09:12 AM   #3
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Quote:
Originally Posted by Boatguy View Post
That code looks like it is for the intake air temperature sensor for all motorcycles. I would almost assume that that is a fairly standard code assignment. Certainly no harm in checking that first.

Thanks. I'll check that out today.
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 02:50 PM   #4
Ol,fart   Ol,fart is offline
 
Ol,fart's Avatar
 
Join Date: Jan 2022
Location: Gatesville Texas
Posts: 161
I think it is generic OBD 2 code P0112.
Intake Air Temp circuit low. The computer is seeing a short or open in the IAT circuit.
Check wires and connectors at the IAT and at the computer. If the circuit is good replace the IAT and clear codes. If that doesn't work the only thing left is computer.
I do not know how to clear a hawk. It may be as simple as disconnecting the battery for a while. If not it may require a scanner.
__________________
2021 RPS Hawk "IKEA" (Came in a box with no instructions)
110 main jet 1washer,2.5 sprockets and the cat fell off( with a little help)
1984 Honda V65 Magna "Daddy's Little Monster"
To whoever stole my anti-depressants.
I Hope Your Happy !


 
Reply With Quote
Old 02-22-2022, 03:04 PM   #5
J4Fun   J4Fun is offline
 
Join Date: May 2021
Posts: 359
Are you sure your battery is sufficient for the job? The battery that came with my Hawk DLX wouldn’t have been. Another thing make sure your fuel tank breather isn’t partially plugged. Just my thoughts 😎


 
Reply With Quote
Old 02-22-2022, 03:14 PM   #6
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,717
Check the IAT sensor with an ohms meter for resistance. The readings should be close to the following for reference. You can heat the sensor with a hair dryer to test the ranges.

Temperature/ Resistance
100 C (212 F) 2.07 K-ohms

90 C (194 F) 2.8 K-ohms

80 C (176 F) 3.8 K-ohms

70 C (158 F) 5.4 K-ohms

60 C (140 F) 7.7 K-ohms

50 C (122 F) 11 K-ohms

40 C (104 F) 16 K-ohms

30 C (86 F) 24 K-ohms

20 C (68 F) 37 K-ohms
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 02-22-2022, 03:21 PM   #7
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Thanks for the suggestions everybody. I'll see 2hat I can figure out.
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 03:23 PM   #8
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Quote:
Originally Posted by J4Fun View Post
Are you sure your battery is sufficient for the job? The battery that came with my Hawk DLX wouldn’t have been. Another thing make sure your fuel tank breather isn’t partially plugged. Just my thoughts ������
It's the stock battery. It has worked so far. I might go ahead and order a better one anyway.
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 03:36 PM   #9
Thumper   Thumper is online now
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,746
Quote:
Originally Posted by DoomHead View Post
It's the stock battery. It has worked so far. I might go ahead and order a better one anyway.

Before you order a battery... See what the voltage is at rest (with a voltmeter/multimeter). You might disconnect it from the bike for the test, then connect it and repeat (shouldn't change if nothing is drawing current)... It should be charged when you do this test. At least 12.5 is OK but kind of weak, maybe 13 or more should be observed across the poles. If it drives the starter and starts the bike, it isn't likely to be causing the problem.


 
Reply With Quote
Old 02-22-2022, 03:45 PM   #10
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Quote:
Originally Posted by Thumper View Post
Before you order a battery... See what the voltage is at rest (with a voltmeter/multimeter). You might disconnect it from the bike for the testr, then connect it and repeat (shouldn't change if nothing is drawing current)... It should be charged when you do this test. At least 12.5 is OK but kind of weak, maybe 13 or more should be observed across the poles. If it drives the starter and starts the bike, it isn't likely to be causing the problem.
Yeah, it cranks and drives the bike no problem.
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 03:49 PM   #11
Thumper   Thumper is online now
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,746
Quote:
Originally Posted by DoomHead View Post
Yeah, it cranks and drives the bike no problem.
Ahh.... Cool. Save your money for the part that (might) need replacing!
Based on the other posts and advice, you are on the right track. I didn't know you could pull codes from these bikes!


 
Reply With Quote
Old 02-22-2022, 04:18 PM   #12
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Quote:
Originally Posted by Thumper View Post
Ahh.... Cool. Save your money for the part that (might) need replacing!
Based on the other posts and advice, you are on the right track. I didn't know you could pull codes from these bikes!
Thanks. Yeah, it's 2 key turns on/off then on the third key turn leave it in the on position.
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 04:25 PM   #13
Ol,fart   Ol,fart is offline
 
Ol,fart's Avatar
 
Join Date: Jan 2022
Location: Gatesville Texas
Posts: 161
I ordered the carbureted model specifically because it dosen't have a computer and the carb is 28 dollars. Lol
__________________
2021 RPS Hawk "IKEA" (Came in a box with no instructions)
110 main jet 1washer,2.5 sprockets and the cat fell off( with a little help)
1984 Honda V65 Magna "Daddy's Little Monster"
To whoever stole my anti-depressants.
I Hope Your Happy !


 
Reply With Quote
Old 02-22-2022, 04:44 PM   #14
DoomHead   DoomHead is offline
 
DoomHead's Avatar
 
Join Date: Jun 2021
Location: North Carolina
Posts: 55
Quote:
Originally Posted by Ol,fart View Post
I ordered the carbureted model specifically because it dosen't have a computer and the carb is 28 dollars. Lol

I kinda wish I would have done the same. That EFI is nice, but I hate, hate, hate messing with electrical systems. HAHA
__________________
2010 Yamaha TTR 250
2020 RPS Hawk DLX 250
1989 Yamaha Big Bear 4x4 350
1984 Honda XR200R dual carb (Sold)


You give me a reason to drink.

I told her to stay right in the mud hole. She went left. Now her nickname is "Swamp Thing."

Every hill is climbable, if you're brave enough.

Let's go to the jewelry store, she said. It'll be fun, she said.


 
Reply With Quote
Old 02-22-2022, 04:49 PM   #15
Thumper   Thumper is online now
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,746
Grin Oh, Duh

Quote:
Originally Posted by Ol,fart View Post
I ordered the carbureted model specifically because it dosen't have a computer and the carb is 28 dollars. Lol
Oh, I missed that. It is a EFI model. Now I see what's going on. No, my primitive, naturally aspirated bike has no code storage!

Reminds me...I have a Suzuki GSX1250FA (Bandit), and the EFI always makes me think twice about any long rides. It has never failed, has monstrous controllable torque, and gets me great Fuel economy (at least 40mpg) no matter how I drive it. But more than once I shut it down with the kill switch, then turned it back on with kill switch, and the EFI was all screwed up, stumbling...bad in traffic!
So I turn key off, turn back on, start it, and it apparently resets and works fine. Weird. So I never use the kill switch to turn it off if I am not really done with the trip! And yes, I will always use a mechanical carb on any single cylinder bike. Trouble with it... clean it up and put it back on the bike. Done.


 
Reply With Quote
Reply

Tags
check engine light, hawk, hawk 250



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:39 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.