Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 11-28-2022, 12:39 AM   #1
SaikotheSergal   SaikotheSergal is offline
 
Join Date: Nov 2022
Location: South Carolina
Posts: 1
Head Scratching Vacuum and Electrical diagram/explanation of a Tao Tao ATA150D?

Hey guys! So I have a tough one on my hands...

I was just given a 2014 TaoTao 150 Bull from my friend who couldn't get it to work, seems fine right?

I am missing every single vacuum line imaginable. I capped off all of the ports on the carb except the fuel intake, and setup the tank to be a direct feed with just a valve I had. The Enrichener is hooked up.

Well, If I spray starter fluid in it, it'll run for a few seconds at max throttle, and then shut off. I already disassembled the carb, and annoyingly the carb is very clean, the bowl isn't sticking, needles looked great!

At this point I think something on the electric side of the atv/carb is bad, but I'm not sure. I don't want to buy a replacement carb only to have the same issue. What exactly are all of these vacuum ports on the motor and transmission? The head has a port that provides really really good vacuum, so I assume that's manifold vacuum?

What do you guys suggest? This is my first ever ATV/vehicle other than a car/truck. Never even owned a ride on mower.


 
Reply With Quote
Reply

Tags
150cc, atv 150, repair, service manual, taotao



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:28 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.