Minkuni VM26 fuel/air convenient extension

JerseyTBR7 · 04-14-2021, 02:00 PM

This little carburetor upgrade makes life much easier for fuel/air adjustments.

You don't have to unmount the carburetor to adjust, or need buy any fancy 90 degree tool.

https://ibb.co/DDr4fQ0
https://ibb.co/vByCx6Y

https://www.ebay.com/itm/Air-Fuel-Mi...r/254699508708

Air Fuel Mixture Screw Adjuster For CRF150R 09 Mikuni VM26 30MM Carb Carburetor

Megadan · 04-14-2021, 04:02 PM

Lots of us have tried one of those. The majority of us didn't have very good luck, but hopefully you found a good one.

JerseyTBR7 · 04-14-2021, 04:08 PM

So far so good.

I had a similar experience on an earlier one I purchased off amazon. I am glad to know I was not alone in that frustration.

I swapped it out after I put in a 30 pilot and tested with the stock fuel/air screw.

One incremental change at a time.

I was getting tired of how difficult it was to start the dang thing prior.

Remedylane · 04-14-2021, 07:26 PM

I ordered the VM 26, and a jet kit. Didn't realize I didn't get pilot jets with them..So when I assembled my hawk, I just put the stick mikuni on, only adjustment I did was raising the idle just a hair. I guess I got lucky because the bike runs great. Starts first or second time, no choke. Purrs like a kitten. Surprised at how good it runs.

04-14-2021, 02:00 PM	#1
JerseyTBR7 Join Date: Oct 2020 Posts: 130	Minkuni VM26 fuel/air convenient extension This little carburetor upgrade makes life much easier for fuel/air adjustments. You don't have to unmount the carburetor to adjust, or need buy any fancy 90 degree tool. https://ibb.co/DDr4fQ0 https://ibb.co/vByCx6Y https://www.ebay.com/itm/Air-Fuel-Mi...r/254699508708 Air Fuel Mixture Screw Adjuster For CRF150R 09 Mikuni VM26 30MM Carb Carburetor
	0

04-14-2021, 04:02 PM	#2
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,110	Lots of us have tried one of those. The majority of us didn't have very good luck, but hopefully you found a good one. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

04-14-2021, 04:08 PM	#3
JerseyTBR7 Join Date: Oct 2020 Posts: 130	So far so good. I had a similar experience on an earlier one I purchased off amazon. I am glad to know I was not alone in that frustration. I swapped it out after I put in a 30 pilot and tested with the stock fuel/air screw. One incremental change at a time. I was getting tired of how difficult it was to start the dang thing prior.
	0

04-14-2021, 07:26 PM	#4
Remedylane Join Date: Jun 2020 Posts: 33	I ordered the VM 26, and a jet kit. Didn't realize I didn't get pilot jets with them..So when I assembled my hawk, I just put the stick mikuni on, only adjustment I did was raising the idle just a hair. I guess I got lucky because the bike runs great. Starts first or second time, no choke. Purrs like a kitten. Surprised at how good it runs.
	0