10-03-2018, 06:14 PM | #1 |
Join Date: Oct 2018
Posts: 38
|
New Venom x21rs rider in missouri.
Hi, just received my x21rs on Monday. Don't have plans for it other than exhaust and carb. I've ordered an AR exhaust, but I have to modify it. Has anyone tried installing a z125 exhaust on their vader, or boom bikes? It looks like the exhaust port on those is angled as well.
|
|
10-03-2018, 06:44 PM | #2 |
Join Date: Feb 2017
Location: Holiday, Florida
Posts: 672
|
Greetings!
Welcome to the forum! I haven’t tried a Z125, so I can’t help you there. If you do get one, let us know how it works out.
Enjoy the Ride!
__________________
Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat |
|
10-08-2018, 03:01 PM | #4 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
Welcome! You get extra points for posting a photo as a brand new member. I would check to see which footpeg fits these bikes as it could be a while before you get yours. Or perhaps Venom will grab one off another bike but they might be drop-shipping so won't have a bike to part out? They have a good reputation, but they might not get a replacement from the mfg. for a while. With Chinese bikes, you aren't looking at Honda quality or service, so be prepared, and sometimes you have to take matters into your own hands such as buying a footpeg.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
10-08-2018, 04:42 PM | #5 | |
Join Date: Oct 2018
Posts: 38
|
Quote:
|
|
|
10-09-2018, 09:31 AM | #6 |
Join Date: Feb 2017
Location: Holiday, Florida
Posts: 672
|
Exhaust Question
Hey Vx21rsjohn,
How did you modify the exhaust to fit? Enjoy the Ride!
__________________
Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat |
|
10-09-2018, 10:24 AM | #7 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,708
|
Sweet looking bike Vx21rsjohn
A little off topic but can you share a picture of how you mounted your camera on your helmet? I just recently bought a similar style helmet and haven't quit figured out how I'm going to mount it. I want to mount up front like yours. I had no problems mounting on my off road style helmet.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
10-09-2018, 04:02 PM | #8 |
Join Date: Sep 2017
Location: N Texas
Posts: 706
|
Nice ride. welcome
|
|
10-09-2018, 11:06 PM | #9 |
Join Date: Oct 2018
Posts: 38
|
I used a combination of pipe bending and an exhaust adaptor. My buddy that bent the 90 of the exhaust pipe didn't bend it back far enough. It has to go from 90 degrees to 110-115 degrees to fit correctly. So I used an exhaust adaptor to make up for the rest. Hope that helps
|
|
10-09-2018, 11:09 PM | #10 | |
Join Date: Oct 2018
Posts: 38
|
Quote:
SUREWO Motorcycle Helmet Chin Mount Compatible with GoPro Hero 7/(2018)/6/5 Black,4 Session,3+,AKASO/Campark/YI Action Camera,Helmet Front and Side Swivel Mount and Adhesive Mounts with Sticky Pads https://www.amazon.com/dp/B07B7HQXS3..._r0wVBbJEQBNN4 Work pretty good. |
|
|
10-09-2018, 11:10 PM | #11 |
Join Date: Oct 2018
Posts: 38
|
|
|
10-10-2018, 07:56 AM | #12 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,708
|
Quote:
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
10-13-2018, 05:14 PM | #13 |
Join Date: Oct 2018
Posts: 38
|
What brake fluid are y'all putting into your vaders? Dot 3 or dot 4?
|
|
10-13-2018, 07:45 PM | #14 |
Join Date: Aug 2018
Posts: 286
|
Cool, another x21. Here's mine. The stickers alone are worth 5 hp
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
10-13-2018, 11:24 PM | #15 |
Join Date: Oct 2018
Posts: 38
|
Nice. I haven't taken mine out yet. Just been changing stuff that I don't like and making sure everything is tight. Do you know the torque specs for the motor mount bolts? I plan on switching them out with some grade 10 when I get some miles on it. I'm going to register it next week.
|
|
|
|
|
|