2019 Hawk 250 speedometer issues

CaliIsAlly · 05-18-2020, 01:54 PM

Hi,

I may have buttons for eyes as I couldn't find the right place to post this. Please forgive me.

My hawk 250 was working awesome until i took it offroad one day and due to a hard bump my speedometer and odometer stopped working while the fuel gauge and gear indicator are working fine. During another rough ride, i noticed a bump knocked it back in and it started to work again but then after afew rides same thing again.

I tested the wiring via ohm meter and its not the wiring. Took the wheel off and it seems like the plastic notch that holds the speedometer in place just fine.

What do i do ? how do I get a working speedometer and odometer again?

Thank you in advance

**JerryHawk250** · 05-18-2020, 02:54 PM

Trace the sensor wire back to the connector and make sure it didn't unplug its self. I'll move this to the Dual Sport Section.

NzBrakelathes · 05-18-2020, 10:04 PM

Yellow to green/ground should be 5v
Red to green/ground should be 5v stopped and reduce somewhat with wheel spinning ( Actually a Hall effect sensor should show a square wave on oscilloscope - volts just kinda show it is functioning.)

QA50 · 09-07-2022, 10:46 PM

I am new here. I just bought a Hawk DLX and put it together. My question is what is the red wire coming out of the digital speedometr? I see no other red to connect it to.

TominMO · 09-08-2022, 12:13 AM

Quote:

Originally Posted by QA50

I am new here. I just bought a Hawk DLX and put it together. My question is what is the red wire coming out of the digital speedometr? I see no other red to connect it to.

It might be for some feature you don't have, if this speedo is also used on a different model.

05-18-2020, 01:54 PM	#1
CaliIsAlly Join Date: Dec 2019 Location: Phoenix Posts: 2	2019 Hawk 250 speedometer issues Hi, I may have buttons for eyes as I couldn't find the right place to post this. Please forgive me. My hawk 250 was working awesome until i took it offroad one day and due to a hard bump my speedometer and odometer stopped working while the fuel gauge and gear indicator are working fine. During another rough ride, i noticed a bump knocked it back in and it started to work again but then after afew rides same thing again. I tested the wiring via ohm meter and its not the wiring. Took the wheel off and it seems like the plastic notch that holds the speedometer in place just fine. What do i do ? how do I get a working speedometer and odometer again? Thank you in advance __________________ 2019 RPS Hawk EFI DLX 250cc
	0

05-18-2020, 02:54 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,739	Trace the sensor wire back to the connector and make sure it didn't unplug its self. I'll move this to the Dual Sport Section. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

05-18-2020, 10:04 PM	#3
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	Yellow to green/ground should be 5v Red to green/ground should be 5v stopped and reduce somewhat with wheel spinning ( Actually a Hall effect sensor should show a square wave on oscilloscope - volts just kinda show it is functioning.)
	0

09-07-2022, 10:46 PM	#4
QA50 Join Date: Sep 2022 Posts: 3	I am new here. I just bought a Hawk DLX and put it together. My question is what is the red wire coming out of the digital speedometr? I see no other red to connect it to.
	0