05-19-2023, 03:06 PM
|
#1 |
|
Join Date: May 2023
Posts: 7
|
Looking for 6mm M6 head bolts for 110
I'm working on a 110cc (152FMH) motor I am rebuilding for a customer. I snapped off one of the head bolts and I'm struggling to find a replacement. Everything out there has M6 threads on the engine side and M7 threads for the acorn head nuts, which will fit through the cylinder and head but not the alignment spacers.
Anyone have a source for acorn nuts and head bolts that are M6 on both sides? I found just the bolts for $20 on tbolt USA but they don't have the acorn nuts (one was missing and now one is filled with head bolt). Or can I get thinner spacers? Also... what are the spacers called? I can't pull any up on the googles. |
|
|
05-19-2023, 03:29 PM
|
#2 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,725
|
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
05-19-2023, 05:12 PM
|
#3 |
Join Date: Aug 2009
Posts: 577
|
|
|
|
|
|
|
 |
| Tags |
| 110cc, head stud |
|
|
Linear Mode
