Zongshen RX3 Parts Cross Reference: Please Contribute!

[keithmaine]

Spud

All these brake pads, rotors, foot pegs, foot pedals, windshields, etc.
So many forums these things are scattered about, it would be nice to have them in one place in one list.

Could you start a sticky of parts cross ref. that all could contribute to.

[keithmaine]

Oil filter is there just the CSC filters or is there another source??

[Co2]

ZS177MM / NC250 Clutch crossreference = Honda dominator 650 , NX 650 EBC CK1170 series dimensions bit tight tolarance 0.01-2mm , same, i used that on my ZS177MM / NC250 confirmed


Note : originals better , only use if cant find original clutchs, just instead exigency (on travel need repair or...)

[SpudRider]

Originally Posted by keithmaine

Spud

All these brake pads, rotors, foot pegs, foot pedals, windshields, etc.
So many forums these things are scattered about, it would be nice to have them in one place in one list.

Could you start a sticky of parts cross ref. that all could contribute to.

I think this thread is an excellent start for that project, Keith. I am pinning this thread to the top of this forum. As members contribute equivalent parts to this thread, I will compile an organized list of parts. I will place that organized list in a closed thread, which I will also pin to the top of this forum.

[keithmaine]

Originally Posted by SpudRider

I think this thread is an excellent start for that project, Keith. I am pinning this thread to the top of this forum. As members contribute equivalent parts to this thread, I will compile an organized list of parts. I will place that organized list in a closed thread, which I will also pin to the top of this forum.

Spud

your simply awesome

[SpudRider]

Originally Posted by Co2

ZS177MM / NC250 Clutch crossreference = Honda dominator 650 , NX 650 EBC CK1170 series dimensions bit tight tolarance 0.01-2mm , same, i used that on my ZS177MM / NC250 confirmed


Note : originals better , only use if cant find original clutchs, just instead exigency (on travel need repair or...)

Thank you, Sir!

I always suspected the RX3 clutch parts were Honda parts. Here is a list of the Honda motorcycles which employ the same friction plates, fiber plates, and clutch springs as the Zongshen RX3.

Honda XR650L
Honda XR600R
Honda NX650
Honda CR500R
Honda CR480R
Honda CR250R

A lot of people like the Tusk Clutch Kits you can purchase from Rocky Mountain ATV/MC.

https://www.rockymountainatvmc.com/p...ch-Kit?v=11638

[SpudRider]

Originally Posted by keithmaine

Oil filter is there just the CSC filters or is there another source??

Until someone discovers otherwise, I don't know of another oil filter which fits the ZS177MM/NC250 engine of the Zongshen RX3.

However, I purchase stainless steel, reusable oil filters for my RX3 from Taobao. They do an excellent job protecting the engine, and are much less expensive than replacing paper oil filters.

https://item.taobao.com/item.htm?spm...cket=10#detail



However, I wouldn't be surprised if a BMW or KTM motorcycle employs these oil filters.

[SpudRider]

Originally Posted by keithmaine

Spud

your simply awesome

Thank you for coming up with the great idea, Keith.

[keithmaine]

Thank you for listening, I find this forum to be one of the best forums I have ever been part of.

[SpudRider]

Originally Posted by keithmaine

Thank you for listening, I find this forum to be one of the best forums I have ever been part of.

It is members such as you who make these forums such a great place to frequent.

[SpudRider]

I have posted a thread with confirmed parts which fit the Zongshen RX3. This closed thread is pinned to the top of this forum, at the following link.

http://www.chinariders.net/showthread.php?t=15532

Please post your confirmed parts in this thread, and I will add those parts to the closed list. If I forget to add any items to the closed list, please don't hesitate to inform me in this thread. Thank you.

[keithmaine]

[detours]

Great idea ... thanks Keith and Spud!

[detours]

How about the accessory plug connectors? The are the ones under the seat, right?

http://www.chinariders.net/showpost....9&postcount=26

[keithmaine]

Originally Posted by detours

How about the accessory plug connectors? The are the ones under the seat, right?

http://www.chinariders.net/showpost....9&postcount=26

Awesome input all the way around