08-24-2023, 05:42 PM | #1 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
hawk update
Performed valve adjustments today. The odometer reads 3400 miles. This marks the second valve adjustment, prompted by increased noise from the engine. Additionally, I have upgraded to an x-ring chain, replacing the stock chain that performed reliably. Ever since the installation of the economical tachometer/hour meter, I've logged approximately 60.1 hours of operation. Notably, there has been no noticeable oil consumption. Some minor clutch refinements were necessary, alongside the tightening of the speedo cable which had become loose and ceased functioning.
Nonetheless, my satisfaction with the motorcycle remains high. It surpasses my previous experience with the Gy-5 model in all aspects except for vibration, where the Gy-5 had a slight edge.
__________________
2022 Hawk 250 |
|
08-25-2023, 01:31 AM | #2 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
doing more stuff.
__________________
2022 Hawk 250 Last edited by Zapkin; 09-02-2023 at 07:36 PM. Reason: trying to be less of a whiny bee with an itch |
|
08-25-2023, 01:31 AM | #3 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
i will be back when I get my mind settled and can be more constructive.
__________________
2022 Hawk 250 |
|
08-25-2023, 08:39 AM | #4 |
Join Date: Feb 2021
Posts: 1,003
|
You are definitely racking up the miles pretty fast. I figure the rear tire is getting pretty thin in the skin. I still have the stock cluster on my TBR7, and a couple weeks ago, I noticed that threaded ring the holds the speedO cable to the speedO ,is off, and just along for the ride. My SpeedO is still working fine, but I need to re attach it.
|
|
08-25-2023, 09:34 AM | #5 |
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,116
|
first off....you're riding the heck out of that thing! good for you! I wish I had enough time on my hands to put that many miles on my KLR. My goldwing gets miles, but that's only because I get to ride it to work all the time. And now, beside the KLR, I finally have my Intruder project licensed and on the road. The goldwing may have to share some work miles with the Intruder for now.
Keep riding and having fun on that thing. it sounds like it's holding up just fine for you. I wonder how many miles you'll put on it!
__________________
Dave Bikes I've owned: Suzuki GS450T, Yamaha XS500, Honda V45 Sabre, Kawasaki Vulcan 1500 Classic (2), Suzuki VX800, Kawasaki Ninja 650, Triumph TT600, Honda Superhawk, Kawasaki Concours 1000 (3, including a sidecar rig), Buell XB9R, Kawasaki Nomad 1500, Concours 14, Honda Goldwing (2), Housen Hawk, Suzuki Intruder 1400, Kawasaki KLR650, Victory V92TC. |
|
08-25-2023, 08:29 PM | #6 |
Join Date: Aug 2020
Location: Australia
Posts: 1,453
|
Stop being so self deprecating for a start.
Everyone is a little bit crazy. Nobody is perfect especially the people who believe they are perfect. Just please try to keep all your specific bike posts to the 1 thread. It stops the forums becoming a bloated mess of random posts and search results. |
|
09-02-2023, 07:14 PM | #7 | |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
Quote:
__________________
2022 Hawk 250 |
|
|
09-02-2023, 07:16 PM | #8 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
new upgrades
New additions to the Hawk: handguards, seat cover, Nibbi carb. It starts, idles, and runs a little better with the new carb. Also, received a fuel filter with it and other stuff I don't need, but redundancy is good, right? I feel like there is a slight increase in power, nothing to freak out about, but noticeable. I want to get an exhaust, but I like it being quiet. Oh well, I'm learning, fellas. If I wouldn't smoke before working on it, it would take me half as much time because I keep doing stupid crap. Oh well, I'm learning!!!! Thanks for all the help. Will keep this as my thread.
approaching 4000 units.
__________________
2022 Hawk 250 |
|
09-02-2023, 07:22 PM | #9 | |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
Quote:
__________________
2022 Hawk 250 |
|
|
09-02-2023, 07:47 PM | #10 | |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
Quote:
__________________
2022 Hawk 250 |
|
|
09-02-2023, 07:49 PM | #11 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
I am pretty much babying this thing so I too am curious about how many miles I will get. The transmission seems okay, it doesn't burn any oil and I gotta say I'm pretty dang impressed..
__________________
2022 Hawk 250 |
|
09-02-2023, 09:07 PM | #12 |
Join Date: Feb 2021
Posts: 1,003
|
Mine (rear tire)is holding up surprising good too. I don't baby mine, but I try not to abuse the bike, mainly because of the reputation of the rims. I like both my TBR7 and Hawk, but I honestly think the Hawk was probably a better bike right off the line. I have a little more power on the 7 now, but I think that both bikes were equal in power , until I did the head, and the 4 degree key. I think I just lost a little love for the 7, because I was having to work on it lately. It never did have anything majorly wrong with it, but I drove the bike for a year, and never had the tank off, and then I had to replace the throttle cable, so I did the head, while I waited for the cable, and was tickled that I finally got around to doing it. I rode the bike a few times, and it started acting up, and off comes the tank again. It was probably the coil not being grounded properly, but I don't know if it was that, or some water in the gas, or just a wire connector. Either way I got that took care of, but thought that I would order a new coil, and CDI, and as soon as I tried the bike with the new CDI, it acted like it wasn't wanting to turn over very good with the electric start, almost like the timing was too high, so I put my old CDI back on, and it acted the same. I was able to kick start it, and it ran already, so I went for a ride, and noticed that my gas gauge was moving like a tach, and come to find out it was because of the way I rerouted my inductive tachometer wire to be neater when I had the tank off, so off comes the tank again. I don't really think the CDI was behind the cranking issue. I think it was just a coincidence that the battery died . I ordered a new battery, and it seems alright, and looking back on it, I do seem to remember the TBR7 starter would kinda almost stop briefly, and then start cranking for some time now. Everything that I have done to the Hawk has been on the cheap, and it benefited from everything I have did. I wasn't very pleased with the sound after de cating it, but I drilling four 7/16" holes in the" inner plate" of the muffler , and I got what I think is a good sound, and the deceleration kackle. I did spring for an adjustable shock for it, and it was well worth it. I think that I have it set up pretty good too, because I can make good time on back roads. . I went for a long ride on a variety of roads today on the Hawk, and even though I got kinda lost , and ended way farther away than I intended, I wasn't at all worried, because I had plenty of gas, and confidence in the bike. I may have taken the TBR7, but it didn't have as much gas, and I didn't want to go into town. I need to ride it the next time, and then I will probably start realizing that it's just as good, which I know it is. It does have around 4,500 on the odometer now, and the Hawk about half that much, or a little more, not only because I've had it longer, but I think I liked it better at first, but the Hawk has really grown on me.
|
|
09-03-2023, 11:16 AM | #13 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,110
|
Keep up with maintenance and a Hawk will last a very very long time. I didn't baby my first Hawk and I hammered out 4400 miles in about 6 months mostly running on the highways and using it to commute to work. If it wouldn't have gotten stolen I probably would have over 40k miles on it by this point. Most of my issues were wiring/electrical related. Mechanical stuff is flawless as long as you keep up with the lubrication and checking the hardware from time to time.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
09-03-2023, 02:02 PM | #14 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
I do dan. I check the tightness of bolts and change the oil every month no matter the mileage and i put grease on every electrical connection i could find.
__________________
2022 Hawk 250 |
|
09-03-2023, 02:36 PM | #15 |
Join Date: Sep 2022
Location: Ohio Valley
Posts: 745
|
also, when I say I baby her, I mean I dont wind her out unnecessarily and I rarely take her off road. that being said, i live in WV so you can imagine the roads she deals with just going to the grocery store. potholes inside of potholes.
__________________
2022 Hawk 250 |
|
|
|
|
|