Need clutch!! 2005 terminator 200cc

Ohjericho · 04-05-2018, 09:29 PM

Please help I have no idea where to buy parts for this bike. Are there other bikes some of the parts are interchangeable with. Or a parts Mfg I can get the parts from? New to Chinese bikes.

Bruce's · 04-05-2018, 10:49 PM

We need some pictures of what you have in order to help you ,generally China bikes are thrown together with generic parts ,so a picture of the engine will get the ball rolling .

Megadan · 04-06-2018, 02:12 AM

Looks like a typical rebranded GY200 dirt bike, so it likely has a CG200/163FM engine.

The good news is, whole clutch assemblies are out there and cheap.

What we need to know is - how many plates in the stack and how many springs on the pressure plate for a start. So, no matter what, that right side engine cover needs to come off.

humanbeing · 04-06-2018, 06:11 AM

http://www.chinariders.net/showthread.php?t=14003 had good tips

Ohjericho · 04-06-2018, 03:54 PM

Here's a picture of the bike hope you can help

Ohjericho · 04-06-2018, 03:55 PM

Gonna open it up after work today

Mudflap · 04-06-2018, 04:17 PM

Looks like a CB engine from the bits I can see. Clutch may be the same as a CG but I don't know for sure.

Ohjericho · 07-15-2019, 08:11 PM

Was out town and moved around. Didn’t have time to work on the bike but here’s a pic of the clutch.

Mudflap · 07-15-2019, 08:38 PM

If you are feeling lucky you could order a clutch for a Lifan 163FML or any other CG engine and see if it fits. There are many potential small differences that could keep it from fitting but no way to tell without making lots of measurements. Looks the same on the outside.

04-05-2018, 09:29 PM	#1
Ohjericho Join Date: Apr 2018 Posts: 4	Need clutch!! 2005 terminator 200cc Please help I have no idea where to buy parts for this bike. Are there other bikes some of the parts are interchangeable with. Or a parts Mfg I can get the parts from? New to Chinese bikes.
	0

04-06-2018, 02:12 AM	#3
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,110	Looks like a typical rebranded GY200 dirt bike, so it likely has a CG200/163FM engine. The good news is, whole clutch assemblies are out there and cheap. What we need to know is - how many plates in the stack and how many springs on the pressure plate for a start. So, no matter what, that right side engine cover needs to come off. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

04-06-2018, 06:11 AM	#4
humanbeing Join Date: Mar 2008 Posts: 2,436	http://www.chinariders.net/showthread.php?t=14003 had good tips __________________
	1

04-05-2018, 10:49 PM	#2
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	We need some pictures of what you have in order to help you ,generally China bikes are thrown together with generic parts ,so a picture of the engine will get the ball rolling .
	0

04-06-2018, 03:55 PM	#6
Ohjericho Join Date: Apr 2018 Posts: 4	Gonna open it up after work today
	1

04-06-2018, 04:17 PM	#7
Mudflap Join Date: Sep 2014 Posts: 1,929	Looks like a CB engine from the bits I can see. Clutch may be the same as a CG but I don't know for sure.
	0

07-15-2019, 08:38 PM	#9
Mudflap Join Date: Sep 2014 Posts: 1,929	If you are feeling lucky you could order a clutch for a Lifan 163FML or any other CG engine and see if it fits. There are many potential small differences that could keep it from fitting but no way to tell without making lots of measurements. Looks the same on the outside.
	0