XF250 Exhaust bolts missing

omorin92 · 11-23-2019, 06:36 PM

Hello, during my ride home from work, my exhaust (header?) bolts came off and although I made it home, I will not ride until I find the right bolts. Extremely loud. I bought some bolts to try from ACE hardware, which none were the right size. Is this something I can find online to order specifically for the XF250? Or does anyone know the proper size bolt to buy? THANK YOU

Also I've heard people using other make parts on the XF250?

THANK YOU!!!

OneLeggedRider · 11-23-2019, 07:47 PM

So they're bolts and not studs and nuts? 🤔 I'm not familiar with your particular bike but more than likely you can use studs and nuts from the brozz or CSC tt 250. Or get you some hardened metric bolts and lock washers from the local hardware store. As long as it screws in 4 turns without any binding you've got the proper thread pitch. Studs and nuts would be better though.

NzBrakelathes · 11-23-2019, 07:52 PM

M6 or M8 I’d think
It’s just a bolt or stud etc

dh · 11-24-2019, 09:59 AM

Yeah I'd be careful too, don't want to strip anything. SSR supposedly has every part of these bikes in their inventory, but you can't order online or direct from SSR. Dealers can get it though. But this is easy... Looks like you need Allen bolts: M8x35. Lock washers too.

If you want to look up parts online in English, check the site I searched below.... Copy and paste their part numbers into Amazon and you might be able to order there.

11-23-2019, 06:36 PM	#1
omorin92 Join Date: Nov 2019 Posts: 2	XF250 Exhaust bolts missing Hello, during my ride home from work, my exhaust (header?) bolts came off and although I made it home, I will not ride until I find the right bolts. Extremely loud. I bought some bolts to try from ACE hardware, which none were the right size. Is this something I can find online to order specifically for the XF250? Or does anyone know the proper size bolt to buy? THANK YOU Also I've heard people using other make parts on the XF250? THANK YOU!!!
	0

11-23-2019, 07:47 PM	#2
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	So they're bolts and not studs and nuts? 🤔 I'm not familiar with your particular bike but more than likely you can use studs and nuts from the brozz or CSC tt 250. Or get you some hardened metric bolts and lock washers from the local hardware store. As long as it screws in 4 turns without any binding you've got the proper thread pitch. Studs and nuts would be better though. __________________ ~ Don't poke the bear ~ M.M.I. Dean's List graduate class of '95 and Specialty welder 2020 Ice Bear Terifecta 150cc Trike 2011 Honda Foreman 500ES 4x4 2001 Polaris Scrambler 400
	0

11-23-2019, 07:52 PM	#3
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	M6 or M8 I’d think It’s just a bolt or stud etc
	0