Magician 250cc rear sprocket

spiritfeather · 04-02-2017, 11:23 AM

Anyone know what rear sprockets fit the Magician 250? Just got one and it seriously needs a taller gear for my riding style. Thanks--Tony

culcune · 04-02-2017, 12:10 PM

What is it stock? I do know Magicians come equipped with a very street oriented setup, which is one of the reasons many members have actually not embraced the Magician as much as they have embraced the Hawk which comes stock with, if I remember correctly, a 15/50 setup, although other members who do own Magicians prefer the on-road gearing. Hawk sprockets will not work on the Magician, from what I understand.

spiritfeather · 04-02-2017, 12:53 PM

It's got a 15/45 setup, but unlike the Hawk it has a six-bolt rear sprocket. I'd like to go with a 40 or so rather then change the front sprocket. I've dug around on the web a bit but can't come up with the size.

Ascot500 · 04-02-2017, 01:03 PM

I am trying to accomplish the same thing

First, change out the front sprocket to a 17T
You will probably have to grind away a casting gate on the inside of the sprocket cover
This will make a huge difference, although it will still be buzzy at 50 mph

The rear sprocket, I believe is a clone of the Yamaha XG250

TAO BAO may have a 40T available, but I have not tried to go thru the ordering process

I don't think that anything smaller is possible

spiritfeather · 04-02-2017, 01:10 PM

Ok--ordered 17 tooth as you suggest Ascot500, but I'll keep up the search for the rear. I work with a couple of powersports wizards---maybe I'll take the rear off and get the measurements and see if they can find something. If so I'll post it. Thanks!

sshevie · 04-02-2017, 01:23 PM

Op I'm not sure what your riding style is but please keep in mind your magician is a 236 cc air cooled engine producing around 15 horsepower. Its just never going to be a fire breathing beast bent on human destruction.
From what I've watched on them a rear sprocket below 45 takes the engine out the meat of its powerband and will not allow them with any speed.

spiritfeather · 04-02-2017, 01:37 PM

Just like to be able to run 55 to 60 without the engine screaming if I need to--nothing more. Most riding I do is back roads anyway. I live very close to US 129, The Tail of The Dragon, and I ride it a lot, but the low gears are great for that.

culcune · 04-02-2017, 02:01 PM

You should contact member Barnone. He lives out that way during the warmer months (I think he is still a snowbird in Florida right now where he spends the cold months). He seems to always be riding his toys at the Dragon (I know he lives about 45 minutes from there).

chuck · 04-02-2017, 02:40 PM

Quote:

Originally Posted by sshevie

Op I'm not sure what your riding style is but please keep in mind your magician is a 236 cc air cooled engine producing around 15 horsepower. Its just never going to be a fire breathing beast bent on human destruction.
From what I've watched on them a rear sprocket below 45 takes the engine out the meat of its powerband and will not allow them with any speed.

I think you need to factor the individual's weight too.I'm running 17-43 on my Hawk but weigh around 167 lbs.

Ascot500 · 04-02-2017, 02:51 PM

FWIW, on my previous china bike with a CG125 clone engine, I wound up using a 16T front and 34T rear
I am just over 200 lbs and acceleration on the street was never an issue (there are a lot of slow drivers around here)

I think that if you could find one, a 36T rear sprocket would do fine on the Magician

linemanxxlog · 04-02-2017, 02:56 PM

Just out of curiousity what other mods are you running? It really felt like when i gutted the cat on my magician it made it alot easier to run at those higher rpms. A few supporting mods may make it to where you don't want to change the rear sprocket. I would definitely change the front out to a 17t though if you plan on spending alot of time at those speeds. Just to reduce chain wear.

humanbeing · 04-02-2017, 05:59 PM

http://chinariders.net/showthread.ph...058#post243058
According to Japanese site https://www.webike.net/md/844/tab/parts/bm/1152/ 43T seems the smallest rear sprocket for XG250...

spiritfeather · 04-02-2017, 06:50 PM

Thanks guys for the help and links. Put about 40 miles on it this evening and after looking at it closer, it does look like there's no way to put a smaller rear sprocket on.

BigWeld · 04-02-2017, 09:06 PM

Quote:

Originally Posted by chuck

I think you need to factor the individual's weight too.I'm running 17-43 on my Hawk but weigh around 167 lbs.

Gotta factor that, and the weight of the bike, too. I have no idea what they weigh, but the Magician looks way lighter than the Hawk (or any other CB dual sport to be honest)

culcune · 04-03-2017, 12:35 AM

Quote:

Originally Posted by spiritfeather

Thanks guys for the help and links. Put about 40 miles on it this evening and after looking at it closer, it does look like there's no way to put a smaller rear sprocket on.

Don't mess with the rear--45 is ideal for open highway IMO. You will want to try to get an ideal-for-the-street 17 front (again IMO); that should do the trick for your bike.

04-02-2017, 11:23 AM	#1
spiritfeather Join Date: Mar 2017 Posts: 12	Magician 250cc rear sprocket Anyone know what rear sprockets fit the Magician 250? Just got one and it seriously needs a taller gear for my riding style. Thanks--Tony
	0

04-02-2017, 12:10 PM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	What is it stock? I do know Magicians come equipped with a very street oriented setup, which is one of the reasons many members have actually not embraced the Magician as much as they have embraced the Hawk which comes stock with, if I remember correctly, a 15/50 setup, although other members who do own Magicians prefer the on-road gearing. Hawk sprockets will not work on the Magician, from what I understand. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

04-02-2017, 02:01 PM	#8
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	You should contact member Barnone. He lives out that way during the warmer months (I think he is still a snowbird in Florida right now where he spends the cold months). He seems to always be riding his toys at the Dragon (I know he lives about 45 minutes from there). __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

04-02-2017, 05:59 PM	#12
humanbeing Join Date: Mar 2008 Posts: 2,436	http://chinariders.net/showthread.ph...058#post243058 According to Japanese site https://www.webike.net/md/844/tab/parts/bm/1152/ 43T seems the smallest rear sprocket for XG250... __________________
	1

04-02-2017, 12:53 PM	#3
spiritfeather Join Date: Mar 2017 Posts: 12	It's got a 15/45 setup, but unlike the Hawk it has a six-bolt rear sprocket. I'd like to go with a 40 or so rather then change the front sprocket. I've dug around on the web a bit but can't come up with the size.
	0

04-02-2017, 01:03 PM	#4
Ascot500 Join Date: Apr 2007 Posts: 90	I am trying to accomplish the same thing First, change out the front sprocket to a 17T You will probably have to grind away a casting gate on the inside of the sprocket cover This will make a huge difference, although it will still be buzzy at 50 mph The rear sprocket, I believe is a clone of the Yamaha XG250 TAO BAO may have a 40T available, but I have not tried to go thru the ordering process I don't think that anything smaller is possible
	1

04-02-2017, 01:10 PM	#5
spiritfeather Join Date: Mar 2017 Posts: 12	Ok--ordered 17 tooth as you suggest Ascot500, but I'll keep up the search for the rear. I work with a couple of powersports wizards---maybe I'll take the rear off and get the measurements and see if they can find something. If so I'll post it. Thanks!
	1

04-02-2017, 01:23 PM	#6
sshevie Join Date: Sep 2016 Location: Michigan Posts: 118	Op I'm not sure what your riding style is but please keep in mind your magician is a 236 cc air cooled engine producing around 15 horsepower. Its just never going to be a fire breathing beast bent on human destruction. From what I've watched on them a rear sprocket below 45 takes the engine out the meat of its powerband and will not allow them with any speed.
	1

04-02-2017, 01:37 PM	#7
spiritfeather Join Date: Mar 2017 Posts: 12	Just like to be able to run 55 to 60 without the engine screaming if I need to--nothing more. Most riding I do is back roads anyway. I live very close to US 129, The Tail of The Dragon, and I ride it a lot, but the low gears are great for that.
	0

04-02-2017, 02:51 PM	#10
Ascot500 Join Date: Apr 2007 Posts: 90	FWIW, on my previous china bike with a CG125 clone engine, I wound up using a 16T front and 34T rear I am just over 200 lbs and acceleration on the street was never an issue (there are a lot of slow drivers around here) I think that if you could find one, a 36T rear sprocket would do fine on the Magician
	0

04-02-2017, 02:56 PM	#11
linemanxxlog Join Date: Mar 2017 Location: Kansas Posts: 31	Just out of curiousity what other mods are you running? It really felt like when i gutted the cat on my magician it made it alot easier to run at those higher rpms. A few supporting mods may make it to where you don't want to change the rear sprocket. I would definitely change the front out to a 17t though if you plan on spending alot of time at those speeds. Just to reduce chain wear.
	0

04-02-2017, 06:50 PM	#13
spiritfeather Join Date: Mar 2017 Posts: 12	Thanks guys for the help and links. Put about 40 miles on it this evening and after looking at it closer, it does look like there's no way to put a smaller rear sprocket on.
	1