11-04-2022, 07:40 PM
|
#1 |
|
Join Date: Sep 2019
Posts: 69
|
Forks bump and knock sound
I think I've narrowed my shudder issue when braking down to the forks.
My front rotor isn't warped, wheel bearings and headstock bearings are fine, changing fork oil didn't solve my issue either, and there is no movement of the brake caliper causing for slippage. This problem started a few months ago when there was an audible "pop" or "knock" sound as I was taking off and going into a left turn at low a speed. When braking there is shudder as the front forks depress under load. I can replicate this by rocking the bike back and forth while holding the front brake and there is an audible knock and I can also feel the bump. Any idea what this could be? Bike is a 2020 TBR7. Last edited by Slug; 11-04-2022 at 09:08 PM. |
|
|
11-04-2022, 08:05 PM
|
#2 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,728
|
Are the brake calipers bolted on tight?
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
11-04-2022, 09:05 PM
|
#3 | |
|
Join Date: Sep 2019
Posts: 69
|
Quote:
The caliper is bolted down to the fork well but now I have noticed there is still some movement in a different part of the caliper not directly connected to where it's mounted. Tried getting a video to show and listen. Might need to turn up volume a little to hear it-- Sorry it's a bit dark. Video: https://i.imgur.com/MLegO54.mp4 Edit: Yep. I think that the caliper is the issue. I just tried my best to rock back and forth without using the front brakes and didn't notice it. |
|
|
|
|
|
|
 |
|
|
Linear Mode
