BD125-2 "Boomcat"

DudeMantia · 07-03-2019, 12:45 AM

These popped up on Saferwholesale within the last few months in the California approved section.
There is Fairly any plastics on it, and it has a different engine design compared to the Taotao Hellcat.

finally a street bike that isn't a grom clone in CA

Heres the link to the bike
http://www.saferwholesale.com/125cc-...dt-bd125-2.htm

It rides slightly higher than the other 125 and has a more throaty sounding exhaust.

Unboxing photos to follow

DudeMantia · 07-03-2019, 12:51 AM

drum brakes front and rear

DudeMantia · 07-03-2019, 12:55 AM

some more pics

DudeMantia · 07-03-2019, 01:00 AM

front fender was shipped tucked under rear wheel.
caused some paint damage on a rolled edge but nothing really terrible.

Hellkitty · 07-03-2019, 01:56 AM

Cool looking bike. Looks a lot like the Honda CL70 my dad had.

**JerryHawk250** · 07-03-2019, 07:29 AM

Good looking bike.

DudeMantia · 07-06-2019, 05:23 AM

all assembled now

DudeMantia · 07-06-2019, 05:25 AM

here's some pics of this part I haven't seen before.
Maybe apart of the emissions control?

Hellkitty · 07-06-2019, 02:12 PM

That is an EGR system that recirculates some of the exhaust gases back into the intake, most of the guys here with the Boom Vaders and other bikes with EGR's usually block it off with a plate, I'm no sure how its done, maybe someone will weigh in.
Looking forward to hearing some ride reports from you!

pete · 07-07-2019, 06:19 AM

Looks like a Honda Win .. minus the side panels.. come in 100cc / 120cc...
very popular in Cambodia and Loas...

..

scoot newb · 07-07-2019, 05:13 PM

It looks like the 190 could bolt right up.

Adjuster · 07-08-2019, 08:28 AM

Quote:

Originally Posted by DudeMantia

These popped up on Saferwholesale within the last few months in the California approved section.
There is Fairly any plastics on it, and it has a different engine design compared to the Taotao Hellcat.

finally a street bike that isn't a grom clone in CA

Heres the link to the bike
http://www.saferwholesale.com/125cc-...dt-bd125-2.htm

It rides slightly higher than the other 125 and has a more throaty sounding exhaust.

Unboxing photos to follow

Very cool! I believe I essentially have this same bike but in a slightly different configuration. Can you do me a favor and post the numbers off the rear rim and tire? I need to know the rim size and the tire size. Also did you get any information on ordering parts? I may need to order a new rear rim from this bike manufacturer. Thanks for the help!

/

japroios · 07-10-2019, 03:38 PM

Hi,
I was wondering how this bike is working out.
Would you recommend it?
Thanks,
John

wheelbender6 · 07-11-2019, 09:44 PM

"I was wondering how this bike is working out.
Would you recommend it?"

Me too. Good bit cheaper than a K-Pipe. It will be interesting to hear from somebody that has ridden both.

DudeMantia · 07-13-2019, 12:47 AM

Tried to start it after 2 days of storage, and have had troubles with the stock PZ20 carburetor since day one.

Today I put a new better quality one on and it not only fixed the fuel flow issue I was experiencing, it gave a significant boost like the other 125 engines.

I have never experienced wheelies on my Hellcat at all. I just assumed it was because of my weight class, and poor knowledge on how it works.
After riding this BD125-2 for a while I know now it loves to wheelie when I take off from stops, even with the stock PZ20 carb! It must be because the riding position is right over the rear wheel.

the metal body is very pleasing to the eye in the sun, up close it has obvious seams showing that it was built with some sort of sub frame with a "decorative" steel outer shell.
It is very light, much lighter than the Hellcat.

with the stock carb I got it comfortably to 55-58 mph
Upgraded carb will push 60+ but it vibrates uncomfortably at very high speeds

the forward facing horn actually gets peoples attention

One big issue I cant fix yet is im riding and the front wheel feels like its going over a bunch of tiny bumps constantly. I haven't ridden much with spoked wheels, should I get them checked out?

front hand brake is able to pull all the way to the bar, probably just needs proper adjusting unless thats normal.

Will drop some pictures tomorrow

If you want a 125 that isn't "sporty" looking in the modern sense I recommend this bike. big + for it being on the CA approved list.

07-03-2019, 07:29 AM	#6
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Good looking bike. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

07-07-2019, 06:19 AM	#10
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,266	Looks like a Honda Win .. minus the side panels.. come in 100cc / 120cc... very popular in Cambodia and Loas... .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	4

07-11-2019, 09:44 PM	#14
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	"I was wondering how this bike is working out. Would you recommend it?" Me too. Good bit cheaper than a K-Pipe. It will be interesting to hear from somebody that has ridden both. __________________ "Its not WHAT you ride; its THAT you ride"
	2

07-13-2019, 12:47 AM	#15
DudeMantia Join Date: May 2018 Location: California Posts: 30	Tried to start it after 2 days of storage, and have had troubles with the stock PZ20 carburetor since day one. Today I put a new better quality one on and it not only fixed the fuel flow issue I was experiencing, it gave a significant boost like the other 125 engines. I have never experienced wheelies on my Hellcat at all. I just assumed it was because of my weight class, and poor knowledge on how it works. After riding this BD125-2 for a while I know now it loves to wheelie when I take off from stops, even with the stock PZ20 carb! It must be because the riding position is right over the rear wheel. the metal body is very pleasing to the eye in the sun, up close it has obvious seams showing that it was built with some sort of sub frame with a "decorative" steel outer shell. It is very light, much lighter than the Hellcat. with the stock carb I got it comfortably to 55-58 mph Upgraded carb will push 60+ but it vibrates uncomfortably at very high speeds the forward facing horn actually gets peoples attention One big issue I cant fix yet is im riding and the front wheel feels like its going over a bunch of tiny bumps constantly. I haven't ridden much with spoked wheels, should I get them checked out? front hand brake is able to pull all the way to the bar, probably just needs proper adjusting unless thats normal. Will drop some pictures tomorrow If you want a 125 that isn't "sporty" looking in the modern sense I recommend this bike. big + for it being on the CA approved list. Last edited by DudeMantia; 07-13-2019 at 05:21 AM.
	2

07-06-2019, 02:12 PM	#9
Hellkitty Join Date: Dec 2017 Posts: 216	That is an EGR system that recirculates some of the exhaust gases back into the intake, most of the guys here with the Boom Vaders and other bikes with EGR's usually block it off with a plate, I'm no sure how its done, maybe someone will weigh in. Looking forward to hearing some ride reports from you!
	4

07-07-2019, 05:13 PM	#11
scoot newb Join Date: Sep 2018 Posts: 403	It looks like the 190 could bolt right up.
	4

07-10-2019, 03:38 PM	#13
japroios Join Date: Jul 2019 Posts: 1	Hi, I was wondering how this bike is working out. Would you recommend it? Thanks, John
	2