03-26-2019, 09:42 PM | #1 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
Any hobby R/C GEEKS in here?
I have been an rc geek since i got my MRC buggy at 9 yrs old...went from that to an hpi RS4 rally, then an rs4 pro that i carpet raced, a duratrax evader, losi mini t.... abd the more recents my boats....LOL and a car i got on a whim witg my current project... an HPI nitro rs4...just got done putting brembos on the nitro... LOL and also squared away a home brew exhaust for the 46" 4 stroke weed eater powered boat i am working on...
|
|
03-27-2019, 08:34 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
right here. lol I started out building planes out of balsa wood with a cox .049 engines and guidelines at the age of 9 or 10. I still have a few of the engines sitting in a box. I have my first rc plane and well. I've sold off some of the RC cars, boats and trucks. Right now all I have are the one Rc plane waiting for me to reskin, one Traxxas T-Maxx 3.3, a couple of electric RC cars and lots of parts and engines.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 03-27-2019 at 09:20 AM. |
|
03-27-2019, 09:25 AM | #3 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
any tips on cold starting nitros Jerry? i am still new to em....LOL i went thru the breakin (4 tanks of heat cycle, then a few not exceeding half throttle, then 3/4 etc...burned almost a quart of fuel before it saw full throttle) on a new redcat SH .18 engine in the Nitro rs4, but it seems to give me fits starting cold... i prime it til fuel reaches the carb, 2 more primer pumps like the manual states, and try starting. it either floods the cylinder, or is still bone dry and i am sitting there pulling like a maniac trying to start it... once started, runs great, idles great, head temps around 250*F. im a small engine mechanic, but cant seem tho quite figure this one out....LOL all fuel line is fresh Tygon as well.
|
|
03-27-2019, 09:35 AM | #4 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
Quote:
All my RC cars and Trucks had electric starts.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
03-27-2019, 09:48 AM | #6 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
The estarter does make it much easier to start. I've pulled on too many to go back to a pull start.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-27-2019, 09:55 AM | #7 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
My favorite RC right now is my Hubsan 501s Quadcopter. It's more relaxing to just fly around and not be stressed out and worried about crashing and breaking it up.
Racing the Nitro cars and trucks can get expensive. I've broken up swing arms and twisted up axles from racing. Those little Nitro engines can put out some serious torque. The splines on the axles will look like a spirals on a screw after a few races.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-27-2019, 10:52 AM | #8 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
racing the electrics gets equally expensive.... $60+a battery pack, and just as fragile arms, and just as fast...LOL not to mention racing stadium trucks... longer, equally fragile arms....and jumps....LOL then add in a hot brushless system like i did, and run 3s lipos (11.1v) and it goes fast and breaks faster...LOL
|
|
03-27-2019, 11:16 AM | #9 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
Quote:
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
03-27-2019, 11:19 AM | #10 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
i have to put my evader back together and stick my bike GPS in it.... that thing could certainly keep up with the traffic in front of the shop, and that road was a 55mph zone... i would be curious to see what my mini t could do on 3s... was fast enough on 9.6v packs to break every part in the dang thing....LOL would need some better aero though, its twitchy as heck... but... thats what happens with a 8100kv brushless.....LOL
|
|
03-27-2019, 11:28 AM | #11 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
What fuel are you running?20%? The local hobby shop had there own 20% fuel made somewhere. That stuff worked the best. No name, just 20% written on the 1 gallon jug with a marker for about half the cost of the name brand. lol The Traxxas 20% Top Fuel work good but not as well as the no named stuff.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-27-2019, 12:59 PM | #12 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
i have been running Byron 20% with 12% oil IIRC, its all the local shop has... either that or 30%
|
|
03-27-2019, 01:25 PM | #13 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,966
|
Not this kid. I am at the age where I don’t need to get hooked on another hobby, cuz given the chance, I will. I’ll just choose to live vicariously through you guys.
BTW, ever run a Cox .049 in a bedroom? Ehh, what? Can’t hear you.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
03-27-2019, 01:47 PM | #14 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
Ah yes Mom wasn't too happy lol
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 03-27-2019 at 03:26 PM. |
|
03-27-2019, 05:19 PM | #15 |
Join Date: May 2018
Posts: 1,648
|
I got a question for you guys ,my buddy and I were wondering if we can use a radio to control an electric trolling motor on an aluminum boat at my camp ,it needs to travel approximately 250 feet dock to dock hauling materials .We figured one of us could load the boat ,while the other could unload it on the other side .We do have a trolling motor with an electric steering system although we no longer have the actual foot pedal .We have lots of 12 volt power if needed .
|
|
|
|
|
|