Go Back   ChinaRiders Forums > Technical/Performance > Street
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 10-15-2007, 03:02 AM   #1
TJinPgh   TJinPgh is offline
 
Join Date: Oct 2007
Posts: 6
Hi-Bird QH-250II-A 250cc

Anybody know anything about these bikes? Seen one? Have one? Know of another comapny that sells the same bike under another name?

Hi-Bird QH-250II-A $1299.99 (shipping included) on Ebay





RIDER CAPACITY 1 Person
WEIGHT CAPACITY
330LBS

TRANSMISSION SYSTEM
5 Speed Hand Clutch

STARTER
Electric and Kick Start

IGNITION
C.D.I.

MAX. SPEED
60+ MPH

FUEL TANK CAPACITY
3.6 GALLONS

FRONT TIRES SIZE (ATV's)
2.75-18

REAR TIRES SIZE (ATV's)
3.25-18

BRAKE
Front-Disc and Rear-Drum

BRAKE OPERATION MODE Front: Hand Rear: Foot
FRONT SUSPENSION
Twin Hydraulic forks

REAR SUSPENSION Mono Shock with damper control
CYLINDER ARRANGEMENT
Single Cylinder

ENGINE
Single Cylinder

ENGINE COOLING
Air-Cooled

HORSEPOWER
20 HP

DISPLACEMENT
250 cc

DIMENSION (L x W x H)
81.5" x 28.7'' x 42.1"

GROUND CLEARANCE
8"

SEAT HEIGHT
30.5"

FOOTPEG TO SEAT HEIGHT
20"


 
Reply With Quote
Old 10-15-2007, 09:08 AM   #2
frostbite   frostbite is offline
 
Join Date: May 2006
Location: Fredericton, NB, Canada
Posts: 1,744
Interesting, if the rider capacity is '1 person' why the passenger pegs and the 2up seat?
__________________
Frostbite

"The beatings will continue until moral improves"


 
Reply With Quote
Old 10-15-2007, 12:42 PM   #3
TJinPgh   TJinPgh is offline
 
Join Date: Oct 2007
Posts: 6
yeah, I saw that.

There are two different sellers on Ebay that have the bike. One says 1 rider, the other doesn't. The one that didn't had a few different quirks, though.

At any rate, Hi-Bird doesn't seem to have a website of it's own (or, at least nothing I could find through a Google search, anyway) so I couldn't find out anything else about them.

Haven't seen the same bike with any other name on them (Roketa, etc) either.

The bike looks like it could be a Honda Nighthawk clone. Lines are similar. Even the seat lines are nearly identical. The only difference would be that the Hi-Bird has a front disc brake. The U.S. Nighthawk had dual drums.

At any rate, very nice looking bike. Would like to get a look at one up close.


 
Reply With Quote
Old 10-15-2007, 02:54 PM   #4
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
Try www.hbmusa.us but I don't think they have updated their website to reflect this bike or their new 250 enduro.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 10-15-2007, 03:42 PM   #5
liverchip   liverchip is offline
 
Join Date: Nov 2006
Location: Mystery Spot
Posts: 1,223
Send a message via MSN to liverchip
Hmmm the specs say single cylinder, yet I seem to see a second pipe exiting the head on the other side of the bike....interesting.
__________________
2009 XR650L Big Red Pig
Tusk bar risers

2007 X-Moto(Jetmoto) GY250
--mods---
15/40 sprockets
UNI Pod Filter

2007 Shineray TMS 200XYi--Betsy
Betsy Mods:______________________
Acerbis DHH headlight
FMF Powercore pipe
Uni Pod Filter


 
Reply With Quote
Old 10-16-2007, 01:55 AM   #6
TJinPgh   TJinPgh is offline
 
Join Date: Oct 2007
Posts: 6
There are now a few others like this popping up on Ebay.

They are apparently being marketed under the brand names Hi-Bird and Ciello. They all have variations on what they are claiming about the bike with respect to thinks like fuel economy and top speed, but that's typical of Ebay listings.

They're all pretty consistent about the single cylinder, despite the fact that they DO have pipes on both sides. I'm guessing it just splits off at the header into two pipes. Not sure if it serves any purpose other than to probably mimic the dual pipes of the Nighthawks.





At any rate, I've gotta admit, that bike is pretty sweet looking in blue or yellow...





 
Reply With Quote
Old 10-16-2007, 10:27 AM   #7
dingerjunkie   dingerjunkie is offline
 
Join Date: Aug 2007
Posts: 60
no big deal...

Quote:
Originally Posted by liverchip
Hmmm the specs say single cylinder, yet I seem to see a second pipe exiting the head on the other side of the bike....interesting.
This is/was very common with Honda "radial" RFVC heads. Dual exhaust valves leading to dual exhaust ports leading to two smaller headers. This would indicate that the motor is at least a three-valve, if not a four-valve head.

Interesting...wouldn't make sense to split an exhaust port off of a single exhaust valve.


 
Reply With Quote
Old 10-19-2007, 06:50 PM   #8
xt477   xt477 is offline
 
Join Date: Mar 2007
Location: Columbus Ohio
Posts: 16
CAUTION!!! Luckyseven is MOTOREXTREMES

http://chinariders.net/modules.php?n...ewtopic&t=1907

http://chinariders.net/modules.php?n...ewtopic&t=1742


http://blogs.ebay.com/ddon359/entry/...QQidZ164473019

They fired thier old office manager and changed thier name on ebay AND somehow cleared thier BBB name too!


 
Reply With Quote
Old 10-19-2007, 08:47 PM   #9
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
Quote:
Originally Posted by xt477


http://blogs.ebay.com/ddon359/entry/...QQidZ164473019

They fired thier old office manager and changed thier name on ebay AND somehow cleared thier BBB name too!
Wow, I looked over this guy's (ddon-Motorextreme's customer)blog, and then went to his "negative" feedback from Motorextreme who stated they "oversold a bike and tried to get him a new one" or something very similar and left their customer a negative! How do you put up an auction for a product you don't have?
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 11-02-2007, 12:07 AM   #10
kens97sto171   kens97sto171 is offline
 
Join Date: Mar 2007
Posts: 193
250 street bike

I have seen several single cyl bikes set up this way. The thing that interests me is that the engine looks just like the 200 that is in my Roketa dual sport. They could easily be a bored and stroked 200, then put a differnt head on it.

There have been many people looking for a "big bore kit" for the 200's This might be an option for them... although it could be to costly to be worth it.

Ken


 
Reply With Quote
Old 09-15-2016, 09:07 AM   #11
Republic   Republic is offline
 
Join Date: Jul 2015
Posts: 118
I found one of these for sale, any idea where to get parts? Are they Suzuki clones?


 
Reply With Quote
Old 09-15-2016, 09:41 AM   #12
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436
ANY pic?
Are u talking this http://www.unmoto.com/file/html/52/3589.html

Powered by "fake-twin" CB250 [69 bore is similar to http://www.zse.cc/productsdetail.asp...=370&CateID=46]
Rest: Similar to some 125 here & there https://www.impex-jp.com/catalogs/mo.../11kc1fj7.html (wheels) ...
__________________


 
Reply With Quote
Old 09-15-2016, 09:55 AM   #13
Merlin   Merlin is offline
 
Join Date: Jun 2016
Location: Colorado
Posts: 1,107
Exclamation

Quote:
Originally Posted by humanbeing View Post
ANY pic?
Are u talking this http://www.unmoto.com/file/html/52/3589.html

Powered by "fake-twin" CB250 [69 bore is similar to http://www.zse.cc/productsdetail.asp...=370&CateID=46]
Rest: Similar to some 125 here & there https://www.impex-jp.com/catalogs/mo.../11kc1fj7.html (wheels) ...
The link is infected.


 
Reply With Quote
Old 09-15-2016, 11:09 AM   #14
Republic   Republic is offline
 
Join Date: Jul 2015
Posts: 118
Yes that is it exactly



 
Reply With Quote
Old 05-23-2024, 11:21 AM   #15
pwbii   pwbii is offline
 
Join Date: May 2024
Location: Central New York State, USA
Posts: 1
I know this is an old thread, but it needs reviving since there still is no solid info for these machines. I have found out though that these are assembled by a number of Chinese companies of different names from loose parts & sold direct to consumers. The parent company seems to be Hi-Bird. I am trying to repair a Komoto named Scooter / Motorcycle, model QH-250II-A. I am looking for body parts for it, namely the battery box. It comes under the GY6 title of applications which covers 50cc through 250cc engines. I have found that the Honda service manual for the CN250 will give all the tech info for this engine that you will need. I found this for free online as a PDF.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:33 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.