200 168 efi scooter fuel pump

Notbostrom · 09-27-2023, 05:46 PM

My particular scooter is a vitacci force 200 efi but I'm sure most of the newer efi scooter use the same fuel pump assembly. Anyone found a non dealer source for these?
My pump works fine but fuel gauge not working so might have to replace the whole assembly.

Also anyone have a wiring diagram?

Notbostrom · 09-27-2023, 08:21 PM

Update
Looks like a Honda pcx150 pump is identical as far as I can tell. Also for me no parts were necessary the rod for the fuel gauge sending unit was just very stiff.

Mudflap · 09-27-2023, 08:29 PM

I've taken the unit out of my Clash to have a look. It's a very simple unit with only 4 wires if I recall correctly. 2 wires to the pump motor and 2 to the fuel level sending unit . Very easy to test on the bench with an ohm meter.

Purpose · 02-14-2024, 04:38 PM

Quote:

Originally Posted by Notbostrom

Update
Looks like a Honda pcx150 pump is identical as far as I can tell. Also for me no parts were necessary the rod for the fuel gauge sending unit was just very stiff.

Did this work? Believe my Tank 200 is in need of a fuel pump.

MadClash200 · 06-07-2024, 03:21 PM

I have a Clash 200 with 115 miles. It ran great till yesterday. When I turned the key didn't hear the fuel pump run and of course no start. Any thing I should try before replacing the pump?

Mudflap · 06-07-2024, 03:53 PM

Check the pump before replacing it. Verify it has power at the connector at the pump.

09-27-2023, 05:46 PM	#1
Notbostrom Join Date: Sep 2023 Posts: 7	200 168 efi scooter fuel pump My particular scooter is a vitacci force 200 efi but I'm sure most of the newer efi scooter use the same fuel pump assembly. Anyone found a non dealer source for these? My pump works fine but fuel gauge not working so might have to replace the whole assembly. Also anyone have a wiring diagram?
	0

09-27-2023, 08:21 PM	#2
Notbostrom Join Date: Sep 2023 Posts: 7	Update Looks like a Honda pcx150 pump is identical as far as I can tell. Also for me no parts were necessary the rod for the fuel gauge sending unit was just very stiff.
	1

09-27-2023, 08:29 PM	#3
Mudflap Join Date: Sep 2014 Posts: 1,930	I've taken the unit out of my Clash to have a look. It's a very simple unit with only 4 wires if I recall correctly. 2 wires to the pump motor and 2 to the fuel level sending unit . Very easy to test on the bench with an ohm meter.
	0

06-07-2024, 03:21 PM	#5
MadClash200 Join Date: Jun 2024 Posts: 1	I have a Clash 200 with 115 miles. It ran great till yesterday. When I turned the key didn't hear the fuel pump run and of course no start. Any thing I should try before replacing the pump?
	0

06-07-2024, 03:53 PM	#6
Mudflap Join Date: Sep 2014 Posts: 1,930	Check the pump before replacing it. Verify it has power at the connector at the pump.
	1