Resetting the ECU

Phane · 03-21-2024, 08:33 PM

Have anyone of you had to reset the ECU: this is the method described:
To reset motorcycle ecu, you can follow these steps:
Turn off the engine and the ignition switch, and unplug the ecu from your bike.
Remove the negative and positive wires from the battery terminal and leave it for 10-15 minutes.
Plug the ecu back to your bike, reconnect the battery wires, and turn on the ignition switch.
Start the engine and let it idle for a few minutes.

I was wondering would this cause any problems on my KPR 200

krat · 03-22-2024, 12:15 AM

No more than replacing the old ECU unit with a new one!

Phane · 03-22-2024, 12:59 AM

Turns out that all I needed to do was adjust my valve clearances and not bother the ecu or air gulp screw!

03-21-2024, 08:33 PM	#1
Phane Join Date: Jan 2024 Posts: 20	Resetting the ECU Have anyone of you had to reset the ECU: this is the method described: To reset motorcycle ecu, you can follow these steps: Turn off the engine and the ignition switch, and unplug the ecu from your bike. Remove the negative and positive wires from the battery terminal and leave it for 10-15 minutes. Plug the ecu back to your bike, reconnect the battery wires, and turn on the ignition switch. Start the engine and let it idle for a few minutes. I was wondering would this cause any problems on my KPR 200
	0

03-22-2024, 12:15 AM	#2
krat Join Date: Nov 2019 Location: KY Posts: 277	No more than replacing the old ECU unit with a new one! __________________ %90 of the Chinese motorbikes ever made are still on the road. The other %10 made it back home.
	1

03-22-2024, 12:59 AM	#3
Phane Join Date: Jan 2024 Posts: 20	Turns out that all I needed to do was adjust my valve clearances and not bother the ecu or air gulp screw!
	1