Go Back   ChinaRiders Forums > General > New Member Introductions
Reload this Page New rider
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-25-2024, 12:23 PM   #1
oldguy1960   oldguy1960 is offline
 
Join Date: Aug 2024
Posts: 7
New rider
just got a Xpro 250 templar . I live in west Virginia . I would like to meet up other riders and get their take on the templar . HELLO EVERYONE


 
Reply With Quote
Old 08-25-2024, 01:10 PM   #2
cheesy   cheesy is offline
Moderator
 
cheesy's Avatar
 
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,989
Hiya.
__________________
Cheesy
______________________________________
07 Hi Bird Enduro-Flown the Coop

07 Ural Gear Up
79 Honda CX500
77 VeloSolex 4600 V3
73 VeloSolex 3800

I'm making this up as I go.-Indiana Jones

Telling me something 'is for my own good', is a fast way to a fat lip.-Me

I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts


 
Reply With Quote
Old 08-25-2024, 03:55 PM   #3
bigdano711   bigdano711 is offline
 
bigdano711's Avatar
 
Join Date: Jun 2023
Location: Big Piney, WY
Posts: 623
Quote:
Originally Posted by oldguy1960 View Post
just got a Xpro 250 templar . I live in west Virginia . I would like to meet up other riders and get their take on the templar . HELLO EVERYONE
Welcome to the forum. Is this your first bike? Excellent choice.
__________________
2023 Hawk 250 from XPRO off of Amazon
MOUNTAIN MAN RC + MOTO on YouTube

"If there were more bloody noses, there would be less wars." - Hagbard Celine

John 2:15 So He made a whip out of cords and drove all from the temple area, both sheep and cattle; He scattered the coins of the money changers and overturned their tables.


 
Reply With Quote
Old 08-27-2024, 02:21 PM   #4
oldguy1960   oldguy1960 is offline
 
Join Date: Aug 2024
Posts: 7
what size nut is the rear axel ? 2024 x pro templar 250


 
Reply With Quote
Old 08-27-2024, 02:37 PM   #5
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,725
Welcome aboard!
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 08-27-2024, 04:31 PM   #6
Thumper   Thumper is offline
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,770
Quote:
Originally Posted by oldguy1960 View Post
what size nut is the rear axel ? 2024 x pro templar 250
32mm, or 1-1/4"
no more than 60 ft lbs
__________________
No matter where you go, there you are


 
Reply With Quote
Old 08-27-2024, 10:36 PM   #7
buzz   buzz is offline
 
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 955
you mean the lugnut?


 
Reply With Quote
Old 08-28-2024, 11:59 AM   #8
J4Fun   J4Fun is offline
 
Join Date: May 2021
Posts: 360
Quote:
Originally Posted by Thumper View Post
32mm, or 1-1/4"
no more than 60 ft lbs
Thumper just curious, about these measurements for the rear axle nut? I figured 22mm or 7/8” for the socket or wrench to remove the nut at the most. Both my Hawk 250 DLX and XPRO 150 DLX use a 19 mm wrench or socket for the nut. Just asking because that seems large…


 
Reply With Quote
Old 08-28-2024, 12:42 PM   #9
Thumper   Thumper is offline
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,770
Quote:
Originally Posted by J4Fun View Post
Thumper just curious, about these measurements for the rear axle nut? I figured 22mm or 7/8” for the socket or wrench to remove the nut at the most. Both my Hawk 250 DLX and XPRO 150 DLX use a 19 mm wrench or socket for the nut. Just asking because that seems large…
The left side has no hex head. The axel has flat sides that recess in the slider bushing, so only the right side has a nut. Photo below...The axle nut has nylon locking collar. And yes, it is a 32mm nut. I go about 50 ft lbs, and it never budges.

Check out posts 1 and 4 here for the axle nut photos:

https://www.chinariders.net/showthread.php?t=31046

Here is a pic showing the left axle end. Once installed, it can't rotate- It can only slide forward/back in the axle guide/bushing, held back by the adjustment stand-off bolt. This swingarm is beefy compared to the box steel swingarm on the Hawk, Bashan Storm, etc.

Click image for larger version Name: LeftRearAxleAdjuster.JPG Views: 65 Size: 685.1 KB ID: 31886
__________________
No matter where you go, there you are


 
Reply With Quote
Old 08-28-2024, 01:04 PM   #10
J4Fun   J4Fun is offline
 
Join Date: May 2021
Posts: 360
Thanks for the response Thumper! I like them bikes and was thinking of getting one


 
Reply With Quote
Reply

Tags
mcgonzo


« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:39 AM.

Contact Us - ChinaRiders.net - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.