Zong parts help

Curtdawg · 02-04-2015, 12:06 AM

Hi everyone I just bought a broken down zong 250 169fmm. The output shaft is nfg as well as the right angle gear box that drives the shaft. I've bought a replacement motor but I'm having trouble finding the right angle gear box. Can anyone help me with used parts or a reliable source for new parts. I live in British Columbia, Canada.
Thanks Curtdawg

Weldangrind · 02-04-2015, 12:26 AM

Welcome!

Where in BC? I'm in Abbotsford.

Is it a quad motor? I bet you could find parts on www.taobao.com; we can give you guidance on that it you like.

Curtdawg · 02-06-2015, 11:17 PM

In Penticton. This is the part in looking for. I'll check out taobao now. Thanks weldngrind.

Weldangrind · 02-07-2015, 11:39 AM

Does your gearbox have reverse built in? This one does: http://item.taobao.com/item.htm?spm=...ucket=8#detail

150 Yuan = $30.09 Canadian.

Curtdawg · 02-15-2015, 10:38 PM

I posted a pic. It's diff than the one you showed me. Ill have some more pics next week. I found taobao hard to understand. How do you search for stuff?

Weldangrind · 02-16-2015, 11:34 AM

You must be getting ready to ride soon in Penticton. Awesome area.

Use Google Chrome, and allow it to translate automatically. Keep your searches as simple as possible, like CG250.

Curtdawg · 02-20-2015, 12:36 AM

Here is a few pics. of the bike the motor and the piece I need still

Curtdawg · 02-20-2015, 12:40 AM

Curtdawg · 02-20-2015, 12:44 AM

Ok I'll test that translater out

Curtdawg · 02-22-2015, 11:37 AM

Does anyone know if he name of this right angle drive portion for the shaft drive atvs. I'm having trouble searching it. Also is there anyone out there with some general knowledge on the shaft portion. Also I was wondering if any of the styles of this angle drive will work and what the differences are eg. Shaft length, spline, fwd/rev, hi/low, non-shifting etc…

Curtdawg · 02-22-2015, 11:39 AM

Oh yea. Weldngrind the translated seems to work fine but having trouble actually getting the piece I need to show up in the list

Weldangrind · 02-23-2015, 01:45 AM

I'm failing to understand which piece is missing. Can you put a circle around it?

Curtdawg · 02-28-2015, 10:48 AM

What's damaged is the output shaft off the transmission and the input splines on this right angle drive to the rear end. I've got a new motor already just need this module. I'm pretty sure this one does nothing but change direction of rotation. But I really don't know much about it I havnt taken it right apart yet to see what's inside I've seen a few with shifters but I don't know if it's for reverse or hi/lo. I ran the motor without it on and the transmission in this one has reverse in it. I guess I should check the new motor though. Not sure what it came out of. All I know is it's a 167-fmm.

Curtdawg · 02-28-2015, 10:53 AM

Pic

Curtdawg · 02-28-2015, 11:01 AM

I'm trying find an app to circle the part I need. Might take me a few days. Not a lot of time to spend on this at the moment. Have you ever used Ali-express or know someone who has? I've Seen these parts for sale there but don't know anything about the site. I'm gonna keep searching taobao for now still maybe I'll stumble across what I need.

02-04-2015, 12:06 AM	#1
Curtdawg Join Date: Jan 2015 Posts: 26	Zong parts help Hi everyone I just bought a broken down zong 250 169fmm. The output shaft is nfg as well as the right angle gear box that drives the shaft. I've bought a replacement motor but I'm having trouble finding the right angle gear box. Can anyone help me with used parts or a reliable source for new parts. I live in British Columbia, Canada. Thanks Curtdawg
	0

02-04-2015, 12:26 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Welcome! Where in BC? I'm in Abbotsford. Is it a quad motor? I bet you could find parts on www.taobao.com; we can give you guidance on that it you like. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-07-2015, 11:39 AM	#4
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Does your gearbox have reverse built in? This one does: http://item.taobao.com/item.htm?spm=...ucket=8#detail 150 Yuan = $30.09 Canadian. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-16-2015, 11:34 AM	#6
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	You must be getting ready to ride soon in Penticton. Awesome area. Use Google Chrome, and allow it to translate automatically. Keep your searches as simple as possible, like CG250. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer Last edited by Weldangrind; 03-02-2015 at 11:42 AM. Reason: Spelling
	0

02-23-2015, 01:45 AM	#12
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm failing to understand which piece is missing. Can you put a circle around it? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-15-2015, 10:38 PM	#5
Curtdawg Join Date: Jan 2015 Posts: 26	I posted a pic. It's diff than the one you showed me. Ill have some more pics next week. I found taobao hard to understand. How do you search for stuff?
	0

02-20-2015, 12:44 AM	#9
Curtdawg Join Date: Jan 2015 Posts: 26	Ok I'll test that translater out
	0

02-22-2015, 11:37 AM	#10
Curtdawg Join Date: Jan 2015 Posts: 26	Does anyone know if he name of this right angle drive portion for the shaft drive atvs. I'm having trouble searching it. Also is there anyone out there with some general knowledge on the shaft portion. Also I was wondering if any of the styles of this angle drive will work and what the differences are eg. Shaft length, spline, fwd/rev, hi/low, non-shifting etc…
	0

02-22-2015, 11:39 AM	#11
Curtdawg Join Date: Jan 2015 Posts: 26	Oh yea. Weldngrind the translated seems to work fine but having trouble actually getting the piece I need to show up in the list
	0

02-28-2015, 11:01 AM	#15
Curtdawg Join Date: Jan 2015 Posts: 26	I'm trying find an app to circle the part I need. Might take me a few days. Not a lot of time to spend on this at the moment. Have you ever used Ali-express or know someone who has? I've Seen these parts for sale there but don't know anything about the site. I'm gonna keep searching taobao for now still maybe I'll stumble across what I need.
	0