![]() |
#1 |
Join Date: Oct 2020
Posts: 130
|
Minkuni VM26 fuel/air convenient extension
This little carburetor upgrade makes life much easier for fuel/air adjustments.
You don't have to unmount the carburetor to adjust, or need buy any fancy 90 degree tool. https://ibb.co/DDr4fQ0 https://ibb.co/vByCx6Y https://www.ebay.com/itm/Air-Fuel-Mi...r/254699508708 Air Fuel Mixture Screw Adjuster For CRF150R 09 Mikuni VM26 30MM Carb Carburetor |
![]() |
![]() |
#2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Lots of us have tried one of those. The majority of us didn't have very good luck, but hopefully you found a good one.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#3 |
Join Date: Oct 2020
Posts: 130
|
So far so good.
I had a similar experience on an earlier one I purchased off amazon. I am glad to know I was not alone in that frustration. I swapped it out after I put in a 30 pilot and tested with the stock fuel/air screw. One incremental change at a time. I was getting tired of how difficult it was to start the dang thing prior. |
![]() |
![]() |
#4 |
Join Date: Jun 2020
Posts: 33
|
I ordered the VM 26, and a jet kit. Didn't realize I didn't get pilot jets with them..So when I assembled my hawk, I just put the stick mikuni on, only adjustment I did was raising the idle just a hair. I guess I got lucky because the bike runs great. Starts first or second time, no choke. Purrs like a kitten. Surprised at how good it runs.
|
![]() |
|
![]() |
![]() |
|
|