New rider

oldguy1960 · 08-25-2024, 11:23 AM

just got a Xpro 250 templar . I live in west Virginia . I would like to meet up other riders and get their take on the templar . HELLO EVERYONE

**cheesy** · 08-25-2024, 12:10 PM

Hiya.

bigdano711 · 08-25-2024, 02:55 PM

Quote:

Originally Posted by oldguy1960

just got a Xpro 250 templar . I live in west Virginia . I would like to meet up other riders and get their take on the templar . HELLO EVERYONE

Welcome to the forum. Is this your first bike? Excellent choice.

oldguy1960 · 08-27-2024, 01:21 PM

what size nut is the rear axel ? 2024 x pro templar 250

**JerryHawk250** · 08-27-2024, 01:37 PM

Welcome aboard!

Thumper · 08-27-2024, 03:31 PM

Quote:

Originally Posted by oldguy1960

what size nut is the rear axel ? 2024 x pro templar 250

32mm, or 1-1/4"
no more than 60 ft lbs

buzz · 08-27-2024, 09:36 PM

you mean the lugnut?

J4Fun · 08-28-2024, 10:59 AM

Quote:

Originally Posted by Thumper

32mm, or 1-1/4"
no more than 60 ft lbs

Thumper just curious, about these measurements for the rear axle nut? I figured 22mm or 7/8” for the socket or wrench to remove the nut at the most. Both my Hawk 250 DLX and XPRO 150 DLX use a 19 mm wrench or socket for the nut. Just asking because that seems large…

Thumper · 08-28-2024, 11:42 AM

Quote:

Originally Posted by J4Fun

Thumper just curious, about these measurements for the rear axle nut? I figured 22mm or 7/8” for the socket or wrench to remove the nut at the most. Both my Hawk 250 DLX and XPRO 150 DLX use a 19 mm wrench or socket for the nut. Just asking because that seems large…

The left side has no hex head. The axel has flat sides that recess in the slider bushing, so only the right side has a nut. Photo below...The axle nut has nylon locking collar. And yes, it is a 32mm nut. I go about 50 ft lbs, and it never budges.

Check out posts 1 and 4 here for the axle nut photos:

https://www.chinariders.net/showthread.php?t=31046

Here is a pic showing the left axle end. Once installed, it can't rotate- It can only slide forward/back in the axle guide/bushing, held back by the adjustment stand-off bolt. This swingarm is beefy compared to the box steel swingarm on the Hawk, Bashan Storm, etc.

Click image for larger version

Name: LeftRearAxleAdjuster.JPG
Views: 52
Size: 685.1 KB
ID: 31886

J4Fun · 08-28-2024, 12:04 PM

Thanks for the response Thumper! I like them bikes and was thinking of getting one

08-25-2024, 11:23 AM	#1
oldguy1960 Join Date: Aug 2024 Posts: 7	New rider just got a Xpro 250 templar . I live in west Virginia . I would like to meet up other riders and get their take on the templar . HELLO EVERYONE
	2

08-25-2024, 12:10 PM	#2
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,972	Hiya. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	1

08-27-2024, 01:37 PM	#5
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Welcome aboard! __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

08-27-2024, 01:21 PM	#4
oldguy1960 Join Date: Aug 2024 Posts: 7	what size nut is the rear axel ? 2024 x pro templar 250
	0

08-27-2024, 09:36 PM	#7
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 953	you mean the lugnut?
	0

08-28-2024, 12:04 PM	#10
J4Fun Join Date: May 2021 Posts: 357	Thanks for the response Thumper! I like them bikes and was thinking of getting one
	1