Please help

[Atemplar'sfriend22]

Hey, I just started working on a china dirt bike for the first time. It's a 2022 templar X 250. I am doing maintenance and upgrades. I have run into a problem and hope that someone can help...I need the front hub assembly with bearings or the entire front rim. It is a J 21x1.60 6 hole. I found that x-pro has one in their catalog but it is listed as "currently unavailable"...
The right side bearing has spun in the housing causing nearly 3mm diameter of damage. I am in the process of looking for an oversized bearing but haven't had any luck yet and my bearing seal, or any other im afraid, will no longer fit once it is cleaned and prepped for the bigger bearing. Please help and thanks.

[Thumper]

Look at this post

https://www.chinariders.net/showpost...postcount=4008

AND post #4 in this thread
https://www.chinariders.net/showthread.php?t=32177

The Axel, bearings, seals are identical to those Honda (and KTM) models. There are TONS of sources for ALL of these front axel parts. You can spend a lot, or find bargains. But easy to find

[pete]

Hi...
If you are unable to get a new hub...

what is the bearing number.. or the sizes ID and OD..
the bearing is most lightly a deep groove ball race.. 62XX maybe a (6203)?
03 = 17mm bore...
So the next size bigger in the outer race will be a 63XX

Anyway give me the number or size I will look though my bearing books..


.