05-30-2019, 08:35 PM | #1 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
Lifan X-Pect 200 now available
American Lifan just posted on their Facebook page that the X-Pect 200 is now available. I hope that someone gets one and gives us a full rundown, but even more so if that someone is ME! This will be me in a month or so...
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
05-30-2019, 08:56 PM | #2 |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
It would be sweet if you did!
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
05-30-2019, 09:22 PM | #3 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,109
|
I wss kind of hoping they would have used the liquid cooled 6spd motor from the KPR, but I am assuming they were aiming for a price point. The rear drum is mildly disappointing as is the square tube steel swing arm. If I had to chose between the new DLX Hawk and this though, I would take this just for the Lifan quality. Definitely makes a good alternative to the TT250 for roughly the same price.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
05-30-2019, 10:07 PM | #4 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
I was told that was the case--the liquid-cooled/FI engine, when I called Lifan months ago and happened to speak with Tony Sun, the president of American Lifan, on a random call. Or at least what I am quite sure he told me. I know it is a little primitive with its rear brake and swingarm, but I like the simplicity and back to basics of the bike. With an established Lifan network south of the border, I can envision taking this on a low-budget adventure to points south with some confidence; at least to the end of Baja and back.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
05-31-2019, 12:54 AM | #5 | |
Join Date: Dec 2016
Location: Argentina
Posts: 756
|
Quote:
I hope they keep going |
|
|
05-31-2019, 01:02 AM | #6 |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,266
|
those forks do look small...
..
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
|
05-31-2019, 01:57 AM | #8 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
Lifan's dual sports have been around longer than the Hawk. This site was founded in 2006 or so by Frostbite who was a member of a Yahoo! group called Lifan GY-5 or similar name. He owned 2 of the Lifans, and thought that a forum would be a better place to discuss Chinese motorcycles. I had started a group called Jetmotogroup (after Jetmoto, a San Francisco brand that imported and rebranded Shineray bikes) and me and the other guy who started GY-5 were two of the first groups discussing them. Frostbite wondered out loud about starting this site, and the rest is history. Hensim started selling a bike around 2009 that was one of the first dual-sports from China called a '250' but was really a 223 or 229 or whatever it was, and was one of the first over 200cc Chinabike. That was the Hawk's predecessor. I believe Asiawing had a bike around the time of Chinariders' infancy that was older than the Hensim that sold a '250' dual-sport under the Odes name, but it seemed like a one or two-container bike as no more discussion about them came about. Then again, it seemed to be the same thing with the Hensim bikes a few years after. The Hawk is a very 'new' bike, even though its popularity make it seem like it was always around and was/is the standard that seemingly every manufacturer copied.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
05-31-2019, 04:20 AM | #9 |
Join Date: Dec 2016
Location: Argentina
Posts: 756
|
They are small, i don't understand why they keep using those forks and swingarm. They have this chasis and swingarm at their disposal
It's just an Ok chasis and swingarm, in fact that bike is quite popular for MX begginers. |
|
05-31-2019, 05:43 AM | #10 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,109
|
Eventually somebody will get the combination of parts right. I think what a lot of us want is a cross between the two types of bikes sold on the market. If you took my Hawk, put a 6spd 250 in it, and then added the Fast Ace suspension with its 10 inches of travel front and rear, and other billet and alloy hardware from an XTR 250 LC, I think I wouldn't want for anything else. I wouldn't even care about EFI or water cooling (though both would be nice). If I could get THAT combination for less than or equal to $3000. I would be happy.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
05-31-2019, 09:04 AM | #11 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Everyone buys their bits from the same markets in china and screw together as to what ever brings money - they don’t care about the bikes etc no one at the factories really is into bikes cause that’s a “poor farmer transport “
Wealthy just drive cars etc They all have the better parts mixed into cheaper Henson hawk have Usd fork digital gauge and rear drum as in the parts bike I got via my wholesaler from them They are all non mech designed largely but catalogue assembled to your “liking” and what brings the usd$ from outside and into the big boys pockets which then gets used against westerners. If only you knew what you inadvertently supported with your nice usd$i |
|
05-31-2019, 11:28 AM | #12 | |
Join Date: Sep 2017
Location: N Texas
Posts: 706
|
Quote:
|
|
|
05-31-2019, 02:47 PM | #13 | |
Join Date: Dec 2016
Location: Argentina
Posts: 756
|
Quote:
You own a PC? Then you are supporting the CPC You own a cellphone? You are supporting the CPC You own a Japanese, European, 400cc and less motorcycle? Then you it's most likely you have some chinese made parts. High rates suicides, questionable ethics, Human rights disputes. Everyone that can read knows about it. Also everyone that the Orient is not a big fan of the way the west lives. But not buying a chinese motorcycle, is not going to change a thing. The big companies like Apple are the one that can change things, but you think apple stop making Iphones in china??? That would be a disaster for them, so they are going to stick with the "PROUDLY DESIGNED BY AMERICANS MINDS IN CALIFORNIA!!! made in china " The west needs china, in the same way china needs the west. |
|
|
05-31-2019, 09:52 PM | #14 |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
I don't know guys....I just like the bikes and love riding 2 wheels. The rest of the political bs is, for me, just noise that the wind in my face washes away.
I also believe as Dan does... Someone is going to put the complete package together at some point and then - wow look out ! Lifan, Zong, Bashan ect...don't care who I will continue to enjoy watching the evolution of the 250 revolution in our bike world.
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
07-02-2019, 02:08 PM | #15 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
Well Culcune the X-Pect is officially out for sale. So what color are you ordering. lol http://shopapmc.com/New-American-Lif...ded_p_116.html
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|