08-03-2018, 04:37 PM | #1 |
Join Date: Aug 2018
Posts: 3
|
06 Diamo LS200 front wheel spacer
Hi all, I'm new to this forum and did as much searching as I can and haven't found a good answer yet.
I took my front wheel off to fix a flat tire and in the process lost the spacer from it. Does anyone know what part will work for a replacement? From what I can find the bike is modeled off of a honda xr200 but I haven't been able to find a reliable answer for what size spacer I need for it. Any help is appreciated!! |
|
08-05-2018, 08:26 PM | #2 |
Join Date: Aug 2018
Posts: 3
|
bump
|
|
08-16-2018, 10:56 PM | #3 |
Join Date: Aug 2018
Posts: 3
|
bump
|
|
08-17-2018, 02:04 AM | #4 |
Join Date: Feb 2018
Location: LA
Posts: 74
|
Are there 2 spacers or just one on one side? Washers as shims? a cheap socket drilled out that fits the space? I've fred flintstoned stuff, may not be the best solution but...
g |
|
08-17-2018, 11:23 AM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Which side is the spacer supposed to be on?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-17-2018, 05:46 PM | #6 |
Join Date: Jul 2018
Posts: 6
|
on the disc brake side. the side with the speedometer wheel already has a spacer secured with a split ring.
|
|
08-20-2018, 11:26 AM | #7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Do you have a vernier caliper? If not, a cheap one from HF will do the job. Measure the seal hole that the spacer fits into. Measure the axle diameter where the spacer rides. Try to figure out how long the spacer should be.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|