08-19-2018, 09:15 PM | #1 |
Join Date: Jul 2018
Posts: 212
|
Hawk 250 Rear Shock Measurements
Does anyone have specific measurements (in mm) for the Hawk rear monoshock? It's difficult to get measurements of the bushings, etc. with the shock still installed on the Hawk. I'm looking to have it replaced with a custom rear monoshock. I know the center-to-center eyelet length is about 320mm. I need the following:
Width of bottom bushing Width of top bushing (seems a tad shorter than the bottom bushing) Also, what are the inner diameters of the eyelets? Thanks!
__________________
2018 RPS Hawk 250cc Mods so far: 1. Mikuni VM26 Carburetor w/#115 main jet 2. 17T/45T JT sprockets 3. JT 428 X-ring chain 4. Air box mod 5. Hawk Digital Cluster 6. Aftermarket IMS shift lever 7. Performance Aftermarket Exhaust 8. 295mm Nitrogen Gas Monoshock, 20W oil front forks |
|
|
|
|
|