![]() |
#1 |
Join Date: Feb 2008
Posts: 85
|
pwk 28mm clone
alcon star keihin clone carb. at least it looks good. not to sure how i am going to mount it to a 48mm hole to hole spacing flange mount.
|
![]() |
![]() |
#2 |
Join Date: Dec 2016
Location: Argentina
Posts: 756
|
Those clones are ok, i would rate it a bit behind a Nibbi but above an OSAKA or OKO clone.
You are going to get it in a nice body that copies the ones used by sudco. |
![]() |
![]() |
#3 |
Join Date: Feb 2008
Posts: 85
|
the nibbi pwk is almost 3x the cost and the powerjet is fixed where the alcon star powerjet is adjustable. i picked up one of the oko clones and you are right not nearly as well finished.
|
![]() |
|
![]() |
![]() |
|
|