pwk 28mm clone

dr1445 · 08-10-2022, 08:39 AM

alcon star keihin clone carb. at least it looks good. not to sure how i am going to mount it to a 48mm hole to hole spacing flange mount.

Wild Dog · 08-10-2022, 09:17 AM

Those clones are ok, i would rate it a bit behind a Nibbi but above an OSAKA or OKO clone.

You are going to get it in a nice body that copies the ones used by sudco.

dr1445 · 08-10-2022, 12:54 PM

the nibbi pwk is almost 3x the cost and the powerjet is fixed where the alcon star powerjet is adjustable. i picked up one of the oko clones and you are right not nearly as well finished.

08-10-2022, 09:17 AM	#2
Wild Dog Join Date: Dec 2016 Location: Argentina Posts: 756	Those clones are ok, i would rate it a bit behind a Nibbi but above an OSAKA or OKO clone. You are going to get it in a nice body that copies the ones used by sudco.
	0

08-10-2022, 12:54 PM	#3
dr1445 Join Date: Feb 2008 Posts: 85	the nibbi pwk is almost 3x the cost and the powerjet is fixed where the alcon star powerjet is adjustable. i picked up one of the oko clones and you are right not nearly as well finished.
	0