Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-24-2019, 07:39 PM   #1
CaesarVis   CaesarVis is offline
 
Join Date: Mar 2019
Location: New Orleans, LA
Posts: 54
Head Scratching Hawk/Storm Exhaust Temp, Idle & Blinkers

I purchased a Bashan/Roketta Storm 250 a few weeks ago and am currently in the break-in period. I have been letting it just run for a while to help it break-in faster. I have two questions. One: how hot should the exhaust be? I measured the temperature with an infra-red thermometer and it's about 311°C/592°F at the bend right off the head. Two: is there an easy way to determine idle speed without fancy equipment? I adjusted the screw on the side of the carb to what sounds OK to me but I don't have a whole lot of experience. I thought about maybe doing a slow-motion recording on my phone and using a video editing program to count the power strokes but that sounds kind of ridiculous. Three: should the turn signal on the Bashan Storm make an audible *tick-tick* sound to let you know the signal is on? My bike makes no noise at all when the turn signals are on. OH! and can anybody recommend a good/easy digital gauge to me (Samdo/cheap eBay "universal)? The stock one SUCKS terribly! Thanks for any help anybody can give me! I'm enjoying the bike so far...aside from having to basically guess what screw go where!



Last edited by CaesarVis; 03-24-2019 at 07:41 PM. Reason: Add more detail
 
Reply With Quote
Old 03-24-2019, 08:34 PM   #2
pete   pete is offline
 
pete's Avatar
 
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,266
with a bike sitting running with no air flow to help cool the exhaust...

bloody hot..

never let a new motor/bore idle to try and bed the rings in..
only part of a motor that needs running in is the bore...
all other parts start to deteriorate from the second you start the motor..

you can buy a cheap tach for a few dollars wire from it just raps around the spark plug lead..
and it counts spark impulses.. they do have a very slow refresh rate but for what you
want they are perfect....and setting gearing..

like this
https://www.aliexpress.com/item/1pcs...8-2baf7a6c59ee

..
__________________
09 XT660R ...
06 TTR250 ...
80 Montesa H6 125 Enduro...
77 Montesa Cota 348 MRR "Malcom Rathnell Replica"...

Current resto projects..
81 Honda CT110...
80 Kawasaki KL250A1...

11 Husaburg TE125 enduro... "sold" along with another 31...
Lifan 125 Pitbike.. "stolen" ...

KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php

All the best offroad rides in NZ...
http://www.remotemoto.com/

E-mail... xtpete1@gmail.com


 
Reply With Quote
Old 03-24-2019, 10:40 PM   #3
ChipToothy   ChipToothy is offline
 
Join Date: Apr 2018
Posts: 819
I have the Bashan Storm AKA Roketa DB08 etc etc.. .

The exhaust is Catted and moves about as much air as breathing through a reed so it's going to run hot hot hot and probably won't kick start with the stock pipes on there. A good roll start still should work if ever the need arises.

Like already mentioned don't sit at idle for more than a few minutes, 5-10 minutes on a cold morning is my personal max.

I started riding mine in May of last year and still sometimes forget to push the blinker button to un-blink the blinker. The only ticking on the bike should be the valves, they didn't give us a kill switch, proper fitting shifter, sturdy cargo rack or accurate speedo/odometer. We did get USD forks, hand guards and really shiny oddball sized wheels though so that's cool.
__________________
Bashan Storm: Ebay steel exhaust wrapped, folding shift lever, seat mod, vm26 carb, air pod, dual led scrambler headlamps, windshield mod, led brake/tail light, secondary led brake light (swingarm), Ebay 295mm rear shock, back up CDI (racing unknown), oil cooler, digital gauge cluster,


 
Reply With Quote
Old 03-25-2019, 11:51 AM   #4
CaesarVis   CaesarVis is offline
 
Join Date: Mar 2019
Location: New Orleans, LA
Posts: 54
Thank You

Thanks for the replies guys! I usually point a huge fan at it when idling. I just didn't this time because I wanted to test the exhaust temperature to see if I was running too rich or lean.

@Pete - Just bought the one below from Amazon! Thanks for the suggestion and advice! What is the suggested idle RPM of these engines?
https://www.amazon.com/gp/product/B01CR2IC2Q

@chiptoothy - You're right, my legs are not strong enough to kick-start it! I thought I was just being a wussy but I guess not? I wonder if there's a way to add a "ticker" to the blinkers? I bet there's a relatively easy way to tie one into the lines. What do you mean about there not being a proper fitting shifter? I have seen a lot of people saying it sucks and upgrading it. Any recommendations for that? What are USD forks? Also, I see your signature mentions "seat mod." What exactly did you do? It kinda hurts my ass as-is.

Do you guys or anyone else have any digital speedo/tach/etc. gauges that work relatively well and install easily on this bike? Thanks again!


 
Reply With Quote
Old 03-25-2019, 12:50 PM   #5
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,715
The flasher on the Hawk has an audible beep when on. Idle speed is arund 1500-1600 rpm's. Glad to see another member from South Louisiana. Welcome aboard.
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel



Last edited by JerryHawk250; 03-26-2019 at 10:09 AM.
 
Reply With Quote
Old 03-26-2019, 01:34 PM   #6
timcosby   timcosby is offline
 
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
turn idle screw till it almost dies then up it just a tad
__________________
1991 harley heritage softail classic
2016 hawk
kaw h1 400 tripple
13' long chopper in progress
2009 johnny pag bar hog
2004 hd electra glide ultra classic shriner edition
1997 harley davidson 1200 sportster
1972 harley davidson amf sx250


 
Reply With Quote
Old 03-26-2019, 05:06 PM   #7
Megadan   Megadan is offline
 
Megadan's Avatar
 
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,110
Turn signal relay that appears to have a built in signal beeper ( according to reviews ) for $3. https://www.amazon.com/TOOGOO-Flashe.../dp/B00CMO3V0S

Seperate beeper alarm that can be wired into the leads for the turn signal relay for $8 (for 2). https://www.amazon.com/Icstation-85d...AJQEEJM5XCW5K5

This is the shifter I use. Moves the peg inboard quite a bit getting it more out of harms way and opening up some much needed room for the foot. Swapping out the bolt it comes with for a button head allen will make installation much easier.
https://www.amazon.com/IMS-312223-Fl.../dp/B000UKO37Q

As far as seat comfort goes, some guys will put different foam on their seat for comfort. Some guys on here swear by this thing. I have yet to try it, but it's on my wish list to try. https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331
2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1
2024 Royal Enfield Shotgun 650
https://chinariders.net/showthread.php?t=34124


 
Reply With Quote
Reply

Tags
blinker, exhaust, idle, storm



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.