Go Back   ChinaRiders Forums > General > New Member Introductions
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-21-2016, 01:59 PM   #1
NickThrash   NickThrash is offline
 
Join Date: May 2016
Location: Ohio
Posts: 154
Very New Rider needs some help

I have been looking at getting the RPS Hawk 250 because its perfectly within my budget and street legal (which is where i intend to be doing A LOT of my riding). I have been on bikes and 4 wheelers before but never anything with a clutch. so this bike seems great to start out on and practice with. my issue is, i heard the bike comes mostly assembled but still needs some bolts put on, the tires, & the handle bars and i have, also, heard it doesnt come with instructions... Being a new rider, I dont know a damn thing about bikes and its keeping me from purchasing it as i dont think i can properly/safely put it together. Can anybody shed some light on this for me?

Also if anybody knows anything about getting the bike registered in OHIO that would be great too. Or if anybody knows what the best website to order it from is or how i can go about finding a dealer locally, would all be great info to share.


 
Reply With Quote
Old 05-21-2016, 02:16 PM   #2
Adjuster   Adjuster is offline
 
Adjuster's Avatar
 
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
For a relatively small fee some online retailers will assemble the bike and then ship it to you. Try to find and purchase pre assembled. It will cost you a little more but sounds like it may be the way to go for you.


/


 
Reply With Quote
Old 05-21-2016, 02:27 PM   #3
NickThrash   NickThrash is offline
 
Join Date: May 2016
Location: Ohio
Posts: 154
Quote:
Originally Posted by Adjuster View Post
For a relatively small fee some online retailers will assemble the bike and then ship it to you. Try to find and purchase pre assembled. It will cost you a little more but sounds like it may be the way to go for you.


/
Yea i saw someone talking about that but i couldnt find anything on having it assembled by the websites i was looking on e.g. 360powerports, killermotorsports, q9powersports. i wouldnt mind paying the extra but i have no idea how to get it sent assembled


 
Reply With Quote
Old 05-21-2016, 04:20 PM   #4
Adjuster   Adjuster is offline
 
Adjuster's Avatar
 
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
One of our members works for the USA distributor Ricky Power Sports. He may have an answer for you when he sees this thread.


/


 
Reply With Quote
Old 05-21-2016, 05:11 PM   #5
'16 TT250   '16 TT250 is offline
 
Join Date: May 2016
Location: Hacienda Heights, Ca
Posts: 281
If shipping it assembled doesn't pan out you could probably have it shipped to a local shop and have it assembled. Registration shouldn't be an issue. If the seller can't do it for some reason just take a trip to your motor vehicle department and it'll be handled, or maybe AAA if you're a member.


 
Reply With Quote
Old 05-21-2016, 06:56 PM   #6
BlackBike   BlackBike is offline
 
BlackBike's Avatar
 
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
Quote:
Originally Posted by '16 TT250 View Post
If shipping it assembled doesn't pan out you could probably have it shipped to a local shop and have it assembled. Registration shouldn't be an issue. If the seller can't do it for some reason just take a trip to your motor vehicle department and it'll be handled, or maybe AAA if you're a member.
Good answer

Or just buy a tt250, problem solved.
__________________
*****************************************
2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE
2017 Suzuki V Strom 650 XT
"We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~



Last edited by BlackBike; 05-21-2016 at 08:14 PM.
 
Reply With Quote
Old 05-21-2016, 07:41 PM   #7
NickThrash   NickThrash is offline
 
Join Date: May 2016
Location: Ohio
Posts: 154
Quote:
Originally Posted by '16 TT250 View Post
If shipping it assembled doesn't pan out you could probably have it shipped to a local shop and have it assembled. Registration shouldn't be an issue. If the seller can't do it for some reason just take a trip to your motor vehicle department and it'll be handled, or maybe AAA if you're a member.

ya one of my main issues is i dont know of any bike shops around here. which is why im ordering one online. id rather go to a shop and look at what im buying first but i dont really have any other option. and if i did send it to a shop i also dont really have a way to get it home.

but looking into it more, the assembly could possibly be something i could handle. ive worked on cars and stuff but i just dont know shit about bikes. like, i was reading about the chain tension and free play of the clutch (these things i had never heard of before looking into buying a bike) and im not sure i can accurately gauge what those should be at or even know if something is wrong with the bike


 
Reply With Quote
Old 05-21-2016, 08:20 PM   #8
BlackBike   BlackBike is offline
 
BlackBike's Avatar
 
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
Quote:
Originally Posted by NickThrash View Post
ya one of my main issues is i dont know of any bike shops around here. which is why im ordering one online. id rather go to a shop and look at what im buying first but i dont really have any other option. and if i did send it to a shop i also dont really have a way to get it home.

but looking into it more, the assembly could possibly be something i could handle. ive worked on cars and stuff but i just dont know shit about bikes. like, i was reading about the chain tension and free play of the clutch (these things i had never heard of before looking into buying a bike) and im not sure i can accurately gauge what those should be at or even know if something is wrong with the bike
You worked on cars sooo... what more do you need to know. Righty tighty, lefty loosey. I wouldn't worry about it. If you get stuck, there are probably a least 6 people on this site, it seems, 24 hours a day, that can confidently answer your question. Just post it! The site really is an amazing crowd sourced super computer.

Jeez, spud has walked kids through complete electrical wiring systems from this forum alone.
__________________
*****************************************
2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE
2017 Suzuki V Strom 650 XT
"We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~


 
Reply With Quote
Old 05-21-2016, 09:04 PM   #9
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
Welcome! Mail ordering any bike will have you going to your local motor vehicles' office to register it in person. Some states make you take it in for an inspection, although others have you calling the local sheriff or police department to do the inspection. It will take some leg work, and more than likely, you will have to pay tax on the bike since out of state sellers don't collect tax for your state.

The TGB scooter distributors for the US, Excalibur Motorsports, recently went to Ricky Power Sports' west coast warehouse and obtained a Hawk to send to one of their dealers. Excalibur will sell these retail, and when they used to carry a similar enduro a couple years back, they assembled, PDI'd and tested the bikes if they sold one direct and not through one of their dealers, and shipped it that way, ready to ride. I am friends with the owner and the manager, and I would suggest to call them and see if they would be willing to assemble the Hawk for you, which will cost extra, but will be done and ready to ride. I don't know if they will do this or not, since they now concentrate on TGB, but call them and tell them 'Simon' sent you.

909-591-8800

www.atv4usa.com

Be aware, their site is not very retail friendly and, quite frankly, is out of date, but I put them in touch with RPS, and since they are a motorsports distributor, are able to obtain them. You will always get a live voice when you call them, so call them and start there. Check to see if they will assemble the bike for you, and if not, get their price and compare prices to other retailers.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 05-21-2016, 11:16 PM   #10
dpl096   dpl096 is offline
 
dpl096's Avatar
 
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
Quote:
Originally Posted by NickThrash View Post
ya one of my main issues is i dont know of any bike shops around here. which is why im ordering one online. id rather go to a shop and look at what im buying first but i dont really have any other option. and if i did send it to a shop i also dont really have a way to get it home.

but looking into it more, the assembly could possibly be something i could handle. ive worked on cars and stuff but i just dont know shit about bikes. like, i was reading about the chain tension and free play of the clutch (these things i had never heard of before looking into buying a bike) and im not sure i can accurately gauge what those should be at or even know if something is wrong with the bike
If you do some digging on here there's a link to a fairly good video on set-up ....
__________________
************************************************** ***

" Time you enjoy wasting, is not wasted." - John Lennon

“I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
― Thomas Jefferson

"If you don't know where you're going any road will take you there" ....George Harrison song


 
Reply With Quote
Old 05-21-2016, 11:20 PM   #11
dpl096   dpl096 is offline
 
dpl096's Avatar
 
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
Found it .....
__________________
************************************************** ***

" Time you enjoy wasting, is not wasted." - John Lennon

“I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
― Thomas Jefferson

"If you don't know where you're going any road will take you there" ....George Harrison song


 
Reply With Quote
Old 05-21-2016, 11:25 PM   #12
Azhule   Azhule is offline
 
Join Date: Dec 2015
Location: CO
Posts: 1,525
Found it almost at the same time I see (edited to remove a second video )
__________________
"Think as you like... but this self proclaimed Professor is always right" - Buckshot

"You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P.


 
Reply With Quote
Old 05-21-2016, 11:29 PM   #13
dpl096   dpl096 is offline
 
dpl096's Avatar
 
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
Azhule... I watched it again about a week ago simply because I enjoyed it!
__________________
************************************************** ***

" Time you enjoy wasting, is not wasted." - John Lennon

“I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
― Thomas Jefferson

"If you don't know where you're going any road will take you there" ....George Harrison song


 
Reply With Quote
Old 05-21-2016, 11:56 PM   #14
simonjester   simonjester is offline
 
simonjester's Avatar
 
Join Date: Apr 2016
Posts: 311
Superior Powersports sells Storms assembled:

http://http://www.superiorpowersports.com/Motorcycle_s/136.htm

They call it their "Ready to ride" service for $129. And, no I don't work for them. I am considering getting a Storm from them myself.
__________________

2016 CSC TT250



 
Reply With Quote
Old 05-22-2016, 02:15 AM   #15
'16 TT250   '16 TT250 is offline
 
Join Date: May 2016
Location: Hacienda Heights, Ca
Posts: 281
Quote:
Originally Posted by BlackBike View Post
Good answer

Or just buy a tt250, problem solved.
Good option.


 
Reply With Quote
Reply

Tags
new rider, rps hwk 250



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.