Factory battery initial charge?

Z-Rider · 04-16-2021, 02:18 PM

Bike just arrived but I won’t be working on it tonight. As far as charging the stock battery after filling. Do you put the caps back in while charging or leave them out like old school?

Thanks in advance!

JohnC · 04-16-2021, 03:29 PM

Hi, I don't think it matters. I know I left mine in with no issues.

John

Spins · 04-16-2021, 04:28 PM

After I filled my battery, I let it sit for an hour before charging. I installed the caps before charging.

idle_purr · 04-16-2021, 06:22 PM

I filled mine, let it sit over night, then charged it on 2amp for 12 hours.

trez00d · 04-16-2021, 07:24 PM

surprisingly, mine came with a full charge. i didn't have a tender, so i just filled it, let it sit, took it to advance and they said it read fully charged. it worked immediately. mine must have been a fluke

Megadan · 04-16-2021, 08:07 PM

For safety reasons, leave the caps off during the initial charge.

Z-Rider · 04-16-2021, 09:09 PM

Left the caps off for the first 6 hours at 2 amps. It’s not capped and on a tender/maintenance charge overnight

Thanks for the info everyone.

Spins · 04-17-2021, 03:28 PM

The batteries on the Brozz bikes are supposedly shipped pre-charged. You could add the acid let it sit to stabilize and use it to start the bike. My battery showed fully charged in less than 30 minutes on a 1 amp charger.

04-16-2021, 02:18 PM	#1
Z-Rider Join Date: Apr 2021 Location: Mid-Michigan Posts: 16	Factory battery initial charge? Bike just arrived but I won’t be working on it tonight. As far as charging the stock battery after filling. Do you put the caps back in while charging or leave them out like old school? Thanks in advance!
	0

04-16-2021, 04:28 PM	#3
Spins Join Date: Jan 2020 Posts: 287	After I filled my battery, I let it sit for an hour before charging. I installed the caps before charging. __________________ 2019 Z 400 2020 Tan Recon 2021 KLX 300 2022 GPX FSE 450R
	0

04-16-2021, 06:22 PM	#4
idle_purr Join Date: Feb 2021 Location: NY Posts: 218	I filled mine, let it sit over night, then charged it on 2amp for 12 hours. __________________ NO HILL TOO STEEP NO MUD TOO DEEP The Brozz \| The Hawk Upgrades, Accessories, Etc... Assembly Checklist: Brozz 250 \| Hawk 250 ~idle_purr
	0

04-16-2021, 08:07 PM	#6
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,110	For safety reasons, leave the caps off during the initial charge. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

04-17-2021, 03:28 PM	#8
Spins Join Date: Jan 2020 Posts: 287	The batteries on the Brozz bikes are supposedly shipped pre-charged. You could add the acid let it sit to stabilize and use it to start the bike. My battery showed fully charged in less than 30 minutes on a 1 amp charger. __________________ 2019 Z 400 2020 Tan Recon 2021 KLX 300 2022 GPX FSE 450R
	0

04-16-2021, 03:29 PM	#2
JohnC Join Date: Oct 2020 Location: Southeast Michigan Posts: 100	Hi, I don't think it matters. I know I left mine in with no issues. John
	0

04-16-2021, 07:24 PM	#5
trez00d Join Date: Mar 2021 Location: castle hayne, nc Posts: 15	surprisingly, mine came with a full charge. i didn't have a tender, so i just filled it, let it sit, took it to advance and they said it read fully charged. it worked immediately. mine must have been a fluke
	0

04-16-2021, 09:09 PM	#7
Z-Rider Join Date: Apr 2021 Location: Mid-Michigan Posts: 16	Left the caps off for the first 6 hours at 2 amps. It’s not capped and on a tender/maintenance charge overnight Thanks for the info everyone.
	0