12-10-2019, 12:35 PM | #1 |
Join Date: Dec 2019
Posts: 1
|
Hawk250 check engine light and wrong oil
so I bought the hawk dlx efi 250. I had it put together at a shop and the guy put the wrong oil in or something, anyway I rode it around a bit. Only about 19 miles or so then it stalled and I guess over heated. It was hot af.
I changed the oil and it was cloudy and really dark but the cloudy part was kinda grey brown. It idles funny, it will be normal then kinda low then itll rev real high not redline high but about a quarter of the way for about 3-5 seconds then go back to normal idle. The check engine light is on and I have no idea how to check the code... I have not rode the bike since i changed the oil. I also did not flush it Last edited by Bigcheezuz250; 12-10-2019 at 12:39 PM. Reason: Wrong title |
|
12-10-2019, 01:08 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
First I would contact the dealer you bought it from to report the issue and how to read the code. The valves may need adjusting too. Valves on most of theses bikes from the factory will come set to tight with no gap. That alone will cause stalling issues.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
Tags |
check, engine oil, hawk 250 |
|
|