Looking for Hawk 250 tail light lens or assembly

[KPWheeler]

Hi. I am looking for a Hawk 250 tail light lens or assembly.. If anyone knows where to get one or has one for sale please, let me know. Most of the places I've looked are sold out.

Thanks

[TxTaoRider]

I'm using one of these https://www.ebay.com/itm/Enduro-Dirt...-127632-2357-0 on my tbr7, but it does require a little fabrication.

[KPWheeler]

Originally Posted by TxTaoRider

I'm using one of these https://www.ebay.com/itm/Enduro-Dirt...-127632-2357-0 on my tbr7, but it does require a little fabrication.

Cool. Did you have to add width to the base where the 4 screws go or more like drilling different holes to match up?

[TxTaoRider]

Originally Posted by KPWheeler

Cool. Did you have to add width to the base where the 4 screws go or more like drilling different holes to match up?

I had to cut some off the front and drill 4 holes, and add two screws with washers under the rack area for extra support.

I also wired it so when I hit the brake, the brake light and both "turn signal" lights come on together which make a really bright brake light.

[KPWheeler]

Originally Posted by TxTaoRider

I had to cut some off the front and drill 4 holes, and add two screws with washers under the rack area for extra support.

I also wired it so when I hit the brake, the brake light and both "turn signal" lights come on together which make a really bright brake light.

Awesome, Thanks!

[TxTaoRider]

Also you can heat the plastic with a blow dryer and bend the plate holder down some as I could see a cop saying it was too hard to read your plate (that may be a good thing?? Lol). I added a couple thin strips of aluminium behind the plate holder and bent the so the bolts went through them on the plate side and the top part just incase my tire roosted something up there it wouldn't break off.

[JSWhitman]

If it's the same as the TBR7, here is the Tao parts direct address:

https://www.taotaopartsdirect.com/co...br7-tail-light