Boom Vader emissions question

boomrider · 12-31-2022, 12:24 AM

I could not get my plastics off because of an awkwardly placed screw underneath the seat that couldn't be removed. I wanted to remove emissions though, so at the information of a youtube video I watched, the fella said to wiggle the charcoal canister and pull it out. Wiggling was an understatement, but I eventually snatched it out. Is there anything that I need to connect/disconnect after doing this? I left everything as-is after pulling the emissions off so I don't know if I need to connect the hoses that came off somewhere. Thanks so much.

Hunt

Deckard_Cain · 12-31-2022, 02:52 PM

Any lines that were previously connected to something, need to be blocked off or plugged.

If you can post up some pictures of what you have now.. I can tell you what to do. I removed the emissions on my vader so I know what goes where and whatnot.

You'll have the exhaust recirculation tube that will need to be capped off or a block off plate installed as well.

CheapThrills · 12-31-2022, 07:59 PM

A lot of the 'emissions' items fell off while doing my carb upgrade. I plugged the exhaust tubing with some epoxy putty.

https://mymotorcycleblog.com/boom-va...cc-grom-clone/

HTH,

4T_Goblin · 01-01-2023, 01:17 PM

Get an EGR block off plate and you'll be OK. Plug the air inlet on your stock manifold.

12-31-2022, 12:24 AM	#1
boomrider Join Date: Dec 2022 Posts: 3	Boom Vader emissions question I could not get my plastics off because of an awkwardly placed screw underneath the seat that couldn't be removed. I wanted to remove emissions though, so at the information of a youtube video I watched, the fella said to wiggle the charcoal canister and pull it out. Wiggling was an understatement, but I eventually snatched it out. Is there anything that I need to connect/disconnect after doing this? I left everything as-is after pulling the emissions off so I don't know if I need to connect the hoses that came off somewhere. Thanks so much. Hunt
	0

12-31-2022, 07:59 PM	#3
CheapThrills Join Date: Jan 2021 Location: Lehigh Valley Area Posts: 166	A lot of the 'emissions' items fell off while doing my carb upgrade. I plugged the exhaust tubing with some epoxy putty. https://mymotorcycleblog.com/boom-va...cc-grom-clone/ HTH, __________________ - My 3 Bikes: 1. TaoTao TBR7 (My TBR7 Upgrades) 2. Boom Vader (FYI: My Boom Vader Upgrades) 3. 1978 Suzuki SG750 --------------------------------------------- Testing a YouTube Channel
	0

01-01-2023, 01:17 PM	#4
4T_Goblin Join Date: Jun 2021 Posts: 255	Get an EGR block off plate and you'll be OK. Plug the air inlet on your stock manifold. __________________ 2020 Vader X-Pro X-7 2019 Kawasaki Ninja ex400 2022 Lifan KPX 250
	0

12-31-2022, 02:52 PM	#2
Deckard_Cain Join Date: Aug 2019 Location: Bay City, MI Posts: 400	Any lines that were previously connected to something, need to be blocked off or plugged. If you can post up some pictures of what you have now.. I can tell you what to do. I removed the emissions on my vader so I know what goes where and whatnot. You'll have the exhaust recirculation tube that will need to be capped off or a block off plate installed as well.
	0