Confirmed Torque Specifications: Zongshen RX3

SpudRider · 11-18-2015, 02:43 PM

This thread contains a list of confirmed torque specifications for critical bolts of the Zongshen RX3 motorcycle. This thread is closed. Please contribute your confirmed torque specifications at the following thread. Thank you.

http://www.chinariders.net/showthread.php?t=15535

Lower Shock Linkage

All bolts for the rocker/knuckle/arm, except the lower shock bolt: 38 foot-pounds
All bolts for the link/dogbone: 38 foot-pounds
Lower Shock Bolt: 33 foot-pounds

Upper Shock Bolt

33 foot-pounds

Swingarm Bolt

54 foot-pounds

SpudRider · 11-18-2015, 07:15 PM

Rear Axle Bolt

50 foot-pounds

SpudRider · 11-19-2015, 03:19 AM

Torque Specifications Taken from the AJP PR5 Owner's Manual

Oil Drain Plug, Oil Screen Plugs, Oil Filter Cover

Oil Drain Plug: 18.5 foot pounds (25 Nm)
Oil Screen Plugs: 18.5 foot pounds (25 Nm)
Oil Filter Cover Bolts: 6 foot pounds (8 Nm)

Cylinder Head

Cylinder Bolts: 28 foot pounds (38 Nm)

Triple Head Clamps

Upper Triple Clamp: 15 foot pounds (20 Nm)
Lower Triple Clamp: 9 foot pounds (12 Nm)

SpudRider · 11-19-2015, 03:46 AM

Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual

Front Brake Caliper Bolt: 18 foot pounds (25 Nm)
Engine Mount Bolts: 26 foot pounds (36 Nm)
Crankcase Bolt: 7 foot-pounds (10 Nm)

General Torque Specifications

M4 Nuts & Bolts: 26 inch-pounds (3 Nm)
M5 Nuts & Bolts: 53 inch-pounds (6 Nm)
M6 Nuts & Bolts: 10 foot-pounds (7 Nm)
M8 Nuts & Bolts: 18 foot-pounds (25 Nm)
M10 Nuts & Bolts: 33 foot-pounds (45 Nm)

SpudRider · 11-19-2015, 04:04 AM

Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual

Please note, the torques in this diagram are specified in newton-meters. The following link will convert newton-meters to foot-pounds.

http://www.convertunits.com/from/N+m/to/ft+lb

11-18-2015, 02:43 PM	#1
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Confirmed Torque Specifications: Zongshen RX3 This thread contains a list of confirmed torque specifications for critical bolts of the Zongshen RX3 motorcycle. This thread is closed. Please contribute your confirmed torque specifications at the following thread. Thank you. http://www.chinariders.net/showthread.php?t=15535 Lower Shock Linkage All bolts for the rocker/knuckle/arm, except the lower shock bolt: 38 foot-pounds All bolts for the link/dogbone: 38 foot-pounds Lower Shock Bolt: 33 foot-pounds Upper Shock Bolt 33 foot-pounds Swingarm Bolt 54 foot-pounds __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-26-2016 at 05:12 AM.
	1

11-18-2015, 07:15 PM	#2
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Rear Axle Bolt 50 foot-pounds __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	1

11-19-2015, 03:19 AM	#3
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Torque Specifications Taken from the AJP PR5 Owner's Manual Oil Drain Plug, Oil Screen Plugs, Oil Filter Cover Oil Drain Plug: 18.5 foot pounds (25 Nm) Oil Screen Plugs: 18.5 foot pounds (25 Nm) Oil Filter Cover Bolts: 6 foot pounds (8 Nm) Cylinder Head Cylinder Bolts: 28 foot pounds (38 Nm) Triple Head Clamps Upper Triple Clamp: 15 foot pounds (20 Nm) Lower Triple Clamp: 9 foot pounds (12 Nm) __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-19-2015 at 04:10 AM.
	0

11-19-2015, 03:46 AM	#4
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual Front Brake Caliper Bolt: 18 foot pounds (25 Nm) Engine Mount Bolts: 26 foot pounds (36 Nm) Crankcase Bolt: 7 foot-pounds (10 Nm) General Torque Specifications M4 Nuts & Bolts: 26 inch-pounds (3 Nm) M5 Nuts & Bolts: 53 inch-pounds (6 Nm) M6 Nuts & Bolts: 10 foot-pounds (7 Nm) M8 Nuts & Bolts: 18 foot-pounds (25 Nm) M10 Nuts & Bolts: 33 foot-pounds (45 Nm) __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-19-2015, 04:04 AM	#5
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual Please note, the torques in this diagram are specified in newton-meters. The following link will convert newton-meters to foot-pounds. http://www.convertunits.com/from/N+m/to/ft+lb __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	1