06-17-2016, 12:40 PM | #1 |
Join Date: May 2016
Posts: 583
|
Tools & Spare Parts for Hawk Roadside Repairs
What tools and spare parts (links to each if possible) do you recommend keeping on hand for Hawk roadside repairs?
I'll get the list started: Spark Plug, I carry the original since I replaced it with an NGK (2202) DPR8EIX-9 Iridium IX: http://www.amazon.com/dp/B000CSGWZC CDI: what do you recommend Coil, wire and boot: what do you recommend Wrenches: I hate Crescent Hammers, but, with all the different sizes of bolts, should I go this route, and if not, what sizes do you recommend? I know I need 14mm, 17mm, and 19mm for the front and rear axles. Tire spoons Tube patch kit Air pump: I'm going with a Topeak Mountain Morph Pump, but, feel free to offer any other suggestions: http://www.pricepoint.com/Brand/Tope...Morph-Pump.axd Last edited by pcspecialist; 06-17-2016 at 01:29 PM. |
|
06-17-2016, 07:13 PM | #3 |
Join Date: Sep 2015
Location: Garland, Tx
Posts: 65
|
8, 10, 12 mm wrenches and/or sockets for just about every other bolt. I have done more roadside repairs than I'd like to admit but I carry complete metric wrench set, 1/4 and 3/8 ratchet with a few select sockets. 19,17,10,8 mm. A few zip ties, couple extra bolts and electrical tape and jammed into a small bag. Seems to work. Extra cdi and coil/wire lives in the old airbox.
http://pi.roostin.com/images/items/9.../X001-Y001.jpg |
|
06-17-2016, 09:48 PM | #4 |
Join Date: May 2016
Posts: 583
|
Chain master link is a good idea for more reasons than a break..... pretty easy to lose when breaking the chain to remove the rear wheel. I would have forgot about it had you not reminded me.
|
|
06-18-2016, 12:02 AM | #5 |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,265
|
CDI / COIL.... what about the pick ups . don't for get a spare stator..
where do yer stop ?... If you need to carry this stuff ... sell the bike & get a japper the bike not worth owning.... just the basics spanners / hex keys / screw drivers / tape / cable ties / chain link tyre repair kit / tyre levers etc..
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
|
06-18-2016, 04:43 AM | #6 | |
Join Date: May 2016
Location: Bismarck, ND
Posts: 868
|
Quote:
__________________
2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't. |
|
|
|
|
|
|