![]() |
#1 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
Bogie's MS661 chainsaw build
So, as mentioned in the what did you buy thread, i picked up a stihl ms661 (90+cc saw) for free with a blown up top end... still waiting for some of the parts to show up, but starting this anyways....piston and jug were trashed, bottom end seems fine... stout saw this is... gonna add pics once i get home from work...
|
![]() |
![]() |
#2 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
So, this saw (thank you stihl for overcomplicating a chainsaw with computer technology) came from a tree service and had 1274 sucsessful starts totaling 104 hrs ov operation, with a broken piston and scored cylinder, i aquired it as a box of parts...heres the main body, and the piston...
|
![]() |
![]() |
#3 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
I am going the route of performance for cheap on this saw, found a clearance piston and cylinder kit thats based off of one of the premier saw porting wizards work, in precast form, instead of a poor imitation of the stock cyl.
When i got it in there were some questionable bits in the transfer intake and the intake port, so i busted out the carbide cutters and die grinder and went to town... here you can see the stock port size vs the ported size... i could habe opened it up a bit more, but i am new to cleaningup/porting cylinders, and dont want to mess it up so mostly just cleaned up the rough castings and mold markings to smooth out flow Gonna be waiting a week or 2 for the new rubber intake boot to arrive, once thats in, i am gonna swap in a new carb kit and maybe a new fuel line and pulse line as well... then everything goes back together and we make smoke and woodchips! |
![]() |
![]() |
#4 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
So, threw the ole jug and slug in today and for giggles compression tested... mind you this is with new, unseated rings in a fresh honed bore, not something run in... this saw is gonna be a freaking beast...
Last edited by bogieboy; 01-05-2024 at 08:55 PM. |
![]() |
![]() |
#6 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
![]() |
![]() |
![]() |
#7 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,112
|
Holy cow! As I recall, you're quite the guitarist? You must make a Les Paul look like a Uke!
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
![]() |
![]() |
#8 | |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
Quote:
![]() On the MS 661 front, got my intake boot in today, initial run, its snappy.... more so than a stocker, and i hqvent even muffler modded it yet, muffler is all stock so far... need to get a few heat cycles on it, and find some wood to cut...LOL as soon as i can find wood to cut, there *might* be a vid of chips flying (if i remember my tripod LOL) |
|
![]() |
![]() |
#9 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,112
|
Never saw your channel but I recall us chatting about it years ago and posting a few pics of Git-Fiddles. I noodle also but truth be told, I'm a percussionist, who wishes he was out front with you guys!
Been playing lately with a gal here in Volcano. She's quite the talent. Plays guitar and writes all her own tunes. We've decided to go completely acoustic, so she plays her own stuff on a resonator and I use a cajon with roto-toms and a symbol. There are "guitar/bass/drum/vocal bands everywhere here. We wanted to be something completely different for the locals. Time will tell.....
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
![]() |
![]() |
#11 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,905
|
You've used a chainsaw once or twice.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
![]() |
![]() |
#12 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
Once or twice....LOL i am a certified Stihl tech, i would hope i know how to run the dang things...LOL
![]() |
![]() |
![]() |
#13 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,112
|
Sounds like my neighborhood!....minus the friendly fire in the background!
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
![]() |
![]() |
#14 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,535
|
Oh yeah. That saw will burn through a half gallon pretty quick.
![]() I rolled the 250 smoker out for a heat cycle yesterday since we are back in the 60s. Still under 2 hours on the thing. Holy crap what fun! These engines were made to make wood chips and throw dirt! In a good lightweight motorcycle frame, it just wants to jump and it's hard to keep the front tire on the ground!!! ![]()
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
![]() |
![]() |
#15 | |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
Quote:
also ran my freshly ported 044 yesterday, its equally as strong.... and equally as thirsty, just goes to show how much more efficient the newer scavenged engines are... the 90cc classed saw vs 70cc classed saw, 90 is a delayed scavenge ( longer transfers to help prevent reversion and charge loss) and the 70 is standard old style short window ported... the 044 also has a chain that was originally cut/sharpened for the 661...so its a bit aggressive....LOL |
|
![]() |
|
![]() |
![]() |
|
|