![]() |
#1 |
Join Date: Apr 2018
Posts: 4
|
Need clutch!! 2005 terminator 200cc
Please help I have no idea where to buy parts for this bike. Are there other bikes some of the parts are interchangeable with. Or a parts Mfg I can get the parts from? New to Chinese bikes.
|
![]() |
![]() |
#2 |
Join Date: Apr 2015
Location: Sudbury ,Ontario
Posts: 855
|
We need some pictures of what you have in order to help you ,generally China bikes are thrown together with generic parts ,so a picture of the engine will get the ball rolling .
|
![]() |
![]() |
#3 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Looks like a typical rebranded GY200 dirt bike, so it likely has a CG200/163FM engine.
The good news is, whole clutch assemblies are out there and cheap. What we need to know is - how many plates in the stack and how many springs on the pressure plate for a start. So, no matter what, that right side engine cover needs to come off.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#4 |
Join Date: Mar 2008
Posts: 2,436
|
http://www.chinariders.net/showthread.php?t=14003 had good tips
__________________
|
![]() |
![]() |
#5 |
Join Date: Apr 2018
Posts: 4
|
Here's what I have
Here's a picture of the bike hope you can help
|
![]() |
![]() |
#7 |
Join Date: Sep 2014
Posts: 1,907
|
Looks like a CB engine from the bits I can see. Clutch may be the same as a CG but I don't know for sure.
|
![]() |
![]() |
#8 |
Join Date: Apr 2018
Posts: 4
|
Super late reply
Was out town and moved around. Didn’t have time to work on the bike but here’s a pic of the clutch.
|
![]() |
![]() |
#9 |
Join Date: Sep 2014
Posts: 1,907
|
If you are feeling lucky you could order a clutch for a Lifan 163FML or any other CG engine and see if it fits. There are many potential small differences that could keep it from fitting but no way to tell without making lots of measurements. Looks the same on the outside.
|
![]() |
|
![]() |
![]() |
Tags |
200cc, terminator |
|
|