![]() |
#1 |
Join Date: Apr 2023
Posts: 1
|
Cant remove rear axle from a GY6
Hi guys I have an icebear maddog with a GY6 engine.
the rear wheel has been wobbling and I realized is because something is wrong inside the drum where the breaks go, but i can't remove the drum and I think is because the axle has an expander or washer that i have no clue how to remove, can someone help me figure out how to take out the drum? |
![]() |
![]() |
#2 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,559
|
I found a good photo of that drivetrain:
https://www.cajunmaddogs.com/product...ng-case-engine It looks like nothing is preventing it from being removed except friction. Got a puller? Try a puller. I tapping it (the drum) with a hammer when you have a puller applying force should help it loose. That collar in your photo that comes out to the threads appears to be just a sleeve, not pinned in any way or threaded. Is that a spring? Can the collar compress the spring if you push it onto the shaft? I think it should slide off. Can it rotate by hand? I see no eveidence of a circlamp on the shaft in the long-case photo.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
![]() |
![]() |
#4 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,559
|
Good point mudflap. I completel missed that possibility! It would be classic slap in the face if the brakes are holding it on! Sometimes the simplest things...
![]()
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
![]() |
|
![]() |
![]() |
|
|