Vitacci pentora 250 sprockets

[Zmag803@gmail.com]

Not sure what fits? Bolt pattern measures 146 mm from bolt holes center, Yamaha raptor is 145mm, anyone have any sprocket experience

[david3921]

Post a picture. Might be able to match it to a vehicle that one of the members has.

Edit: looking through the JT sprockets catalog shows the Yamaha ATVS (Raptor, Banshee, ect) all have sprockets with 145mm patterns.

http://www.jtsprockets.com/catalogue...search-results

You might want to double check your measurements otherwise you might find something looking through sprockets for the other Japanese manufacturers.

[TORKER]

Yes, don't sweat it. Rear sprocket is Yamaha Raptor 250, YFZ 450. Front sprocket is JTF 328.
If you need info on these, I may be able to help in some aspects since its mostly based on the YAMAHA RAPTOR 250. I'm racing mine and still researching what works. There is some good info on here about it as well. Engine is (mostly) CRF230F. The key word here is MOSTLY. I hope that helps.

TORKER

[Zmag803@gmail.com]

Thank you all for your input, just grabbed a Yamaha sprocket, works great, went down to a 38t get a little more speed for the boy

[TORKER]

Glad to help my friend.

TORKER.

[Dylan9393]

Originally Posted by TORKER

Yes, don't sweat it. Rear sprocket is Yamaha Raptor 250, YFZ 450. Front sprocket is JTF 328.
If you need info on these, I may be able to help in some aspects since its mostly based on the YAMAHA RAPTOR 250. I'm racing mine and still researching what works. There is some good info on here about it as well. Engine is (mostly) CRF230F. The key word here is MOSTLY. I hope that helps.

TORKER

What about an arms? Are the raptor ones compatible? Also what’s a good clutch?