What did you BUY today? - Page 95

PANDEMIC · 01-23-2019, 09:49 AM

So picked this up right away for the plow. $21.?? after 20% coupon.

https://www.harborfreight.com/atvutv...kit-63139.html
Attachment 15534

**JerryHawk250** · 01-23-2019, 10:02 AM

Quote:

Originally Posted by PANDEMIC

So picked this up right away for the plow. $21.?? after 20% coupon.
https://www.harborfreight.com/atvutv...kit-63139.html
Attachment 15534

I'll replace the cable on my daughters winch with the same one. I already stuck myself with a frayed cable.

What winch are you using?

PANDEMIC · 01-23-2019, 10:05 AM

harbor freight winch.

**JerryHawk250** · 01-23-2019, 10:09 AM

Quote:

Originally Posted by PANDEMIC

harbor freight winch.

Are you using the remote or did you hardwire it in? I just installed one on my daughters UTV and mounted a switch on the dash. The remote is still operable.
http://chinariders.net/showthread.php?t=22711

2LZ · 01-23-2019, 11:00 AM

These...

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The original owner put all the same (9.5" width) GS wheels on the car all the way around, so the tires could be rotated. Great idea but the rears looked sucked under the car because they normally come stock with 11" width. I put on 1" hubcentric spacers, but now they stick out a tad too far for my liking. (see pic).

These should make the rims look like it has the stock 11" wide rims now....and I'll still be able to rotate the tires.
A few more items and the project should be "complete enough".

PANDEMIC · 01-23-2019, 05:35 PM

Quote:

Originally Posted by JerryHawk250

Are you using the remote or did you hardwire it in? I just installed one on my daughters UTV and mounted a switch on the dash. The remote is still operable.
http://chinariders.net/showthread.php?t=22711

As of now, it was just run with the Bluetooth remote. But I did retrofit a harbor freight winch onto my grandfather's Yamaha grizzle to replace his burnt out Warn winch just in fall. Good idea to add it in and keep the remote. I gutted the Bluetooth and just hard wired it in for him. his switch looks like this on the handlebars. https://www.amazon.com/ZHUOTOP-Handl...a-569433188546

**JerryHawk250** · 01-23-2019, 05:42 PM

Quote:

Originally Posted by PANDEMIC

As of now, it was just run with the Bluetooth remote. But I did retrofit a harbor freight winch onto my grandfather's Yamaha grizzle to replace his burnt out Warn winch just in fall. Good idea to add it in and keep the remote. I gutted the Bluetooth and just hard wired it in for him. his switch looks like this on the handlebars. https://www.amazon.com/ZHUOTOP-Handl...a-569433188546

My concern was that either the battery would be dead on the remote when I needed it or accidently leave the remote at home. Besides the switch is more convenient instead of having to digging in my pocket just to let out a little line.

PANDEMIC · 01-23-2019, 05:49 PM

I just clipped the remote to my keys I know right where it is always. In the ignition. But going to add a toggle switch for the winch power and add the handlebar in-out toggle switch.

bogieboy · 02-05-2019, 10:54 AM

picked up a pair of Galaxy gear S2s for the wife and i the other day... was time to update the archaic Gear Fits that we had... so far loving them...

**cheesy** · 02-05-2019, 05:54 PM

Just snagged one of these.
https://www.dremel.com/en_US/product...5-05-multi-max
Putting in new flooring on the first floor at Chez Fromage and I had no desire to remove, cut, reinstall, and possibly repaint all the vertical door trim that needed to be under cut. This thing is the catsass. In less than the time it would have taken me to do a single piece of trim, I was able to under cut the twenty vertical trim pieces on the first floor without removing a single piece.

Oh, yeah. Spent $2,700 on flooring yesterday.

bogieboy · 02-05-2019, 07:10 PM

Cheesy... my parents got me a Rockwell Sonicrafter F30 for christmas 2 yrs ago.... agreed... catsass..... you can use that thing for everything.... i even used it for the sink cutout when we did new Formica countertops....
https://www.rockwelltools.com/sonicr...4aAtaWEALw_wcB

roundhouse · 02-05-2019, 08:33 PM

Cheesy, those things are AWESOME! I did my floor I rented a jamb saw to get the door casings at the bottom. An oscillating cutting tool would be a Godsend for that and so many other tasks.

Got my ECU back from VCyclenut with a nice hot tune on it for my FZ01. Cannot wait to get her going again. Waiting on a few more parts before though.

Hellkitty · 02-13-2019, 08:37 PM

Was looking through the latest Harbor Freight ad and saw this LED shop light for 19.99 with a coupon. Picked on up and it's awesome! Brighter than the dual 4ft florescent light it replaced. Great deal for $20

https://www.harborfreight.com/4-Ft-L...il_s1061_0719a

**JerryHawk250** · 02-14-2019, 08:03 AM

Quote:

Originally Posted by Hellkitty

Was looking through the latest Harbor Freight ad and saw this LED shop light for 19.99 with a coupon. Picked on up and it's awesome! Brighter than the dual 4ft florescent light it replaced. Great deal for $20

https://www.harborfreight.com/4-Ft-L...il_s1061_0719a

Good find.

I have a couple of 4ft florescent light I need to replace in my shed.

2LZ · 02-14-2019, 10:36 AM

Quote:

Originally Posted by JerryHawk250

Good find.

I have a couple of 4ft florescent light I need to replace in my shed.

Indeed! The one over my workbench is croaking in the cold.

01-23-2019, 09:49 AM	#1411
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	So picked this up right away for the plow. $21.?? after 20% coupon. https://www.harborfreight.com/atvutv...kit-63139.html Attachment 15534 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	2

02-05-2019, 05:54 PM	#1420
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,961	Just snagged one of these. https://www.dremel.com/en_US/product...5-05-multi-max Putting in new flooring on the first floor at Chez Fromage and I had no desire to remove, cut, reinstall, and possibly repaint all the vertical door trim that needed to be under cut. This thing is the catsass. In less than the time it would have taken me to do a single piece of trim, I was able to under cut the twenty vertical trim pieces on the first floor without removing a single piece. Oh, yeah. Spent $2,700 on flooring yesterday. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

01-23-2019, 10:05 AM	#1413
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	harbor freight winch.
	0

01-23-2019, 05:49 PM	#1418
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	I just clipped the remote to my keys I know right where it is always. In the ignition. But going to add a toggle switch for the winch power and add the handlebar in-out toggle switch.
	0

02-05-2019, 10:54 AM	#1419
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,061	picked up a pair of Galaxy gear S2s for the wife and i the other day... was time to update the archaic Gear Fits that we had... so far loving them...
	0

02-05-2019, 07:10 PM	#1421
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,061	Cheesy... my parents got me a Rockwell Sonicrafter F30 for christmas 2 yrs ago.... agreed... catsass..... you can use that thing for everything.... i even used it for the sink cutout when we did new Formica countertops.... https://www.rockwelltools.com/sonicr...4aAtaWEALw_wcB
	1

02-05-2019, 08:33 PM	#1422
roundhouse Join Date: Sep 2017 Location: N Texas Posts: 706	Cheesy, those things are AWESOME! I did my floor I rented a jamb saw to get the door casings at the bottom. An oscillating cutting tool would be a Godsend for that and so many other tasks. Got my ECU back from VCyclenut with a nice hot tune on it for my FZ01. Cannot wait to get her going again. Waiting on a few more parts before though.
	1