09-20-2018, 09:04 PM | #121 |
Join Date: Jul 2018
Posts: 17
|
OOOHH its when it remove the airbox? thanks man i havent done that yet cause i still have the stock carb on ill do it when i change the carb then, thanks man
|
|
09-21-2018, 06:56 PM | #122 |
Join Date: Jan 2018
Posts: 361
|
yes only when you remove the air box, then you will have the filter on the the crank case hose.
|
|
09-30-2018, 06:47 PM | #123 |
Join Date: Jan 2018
Posts: 361
|
Help!
I can't get me rpms higher then 6-7k topping out speed 50mph wot. After moving from a 105 main jet to a 95 main jet. Needle clip middle. vm22 carb when i had a 110 main jet in it would get 58mph but would bog at 3/4 throttle Whats should i try, think i'll try back up main jet Last edited by Chinabike; 09-30-2018 at 10:56 PM. |
|
10-02-2018, 01:41 PM | #124 |
Join Date: Mar 2018
Posts: 249
|
Where are you located? I'm running a 110 or 115 main.
Have you done a plug chop to see if you're lean or rich? That's probably where I'd start. |
|
10-05-2018, 07:11 PM | #125 | |
Join Date: Jan 2018
Posts: 361
|
Quote:
cali, yeah i was running rich at #115 #110. #105 was still a little on the rich side. I'm running good now at #100 still need to run it some more. I think changing my pod filter mess up my tuning. |
|
|
10-15-2018, 03:33 PM | #126 |
Join Date: Sep 2018
Posts: 5
|
Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.
|
|
10-15-2018, 06:43 PM | #127 |
Join Date: Aug 2018
Posts: 286
|
I found out that fine tuning the idle is best where the throttle is mounted on the handle bars. After u get it smooth there then set it on the carb. I fought a high/low/no idle for days.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
10-16-2018, 06:28 PM | #128 | |
Join Date: Jan 2018
Posts: 361
|
Quote:
Upload the video to youtube and post the link. |
|
|
10-29-2018, 12:04 PM | #129 | |
Join Date: Mar 2018
Posts: 249
|
Quote:
Throw the video on youtube and post the link. |
|
|
|
|
|
|