KPM 200 Resource thread - Page 9

KPM · 09-10-2022, 11:20 AM

Post #85 in this thread states what the chain is.

The rear sprocket on the 2021 KPM200 has 49teeth on 428 chain, and is off set (dinner plate shaped) so I couldn't find any other sprockets that I could safely switch to.

Front sprocket is 16 teeth on 428 chain, this front sprocket has a 20mm shaft hole with 2 bolts and a small gold ring.

The chain is 428 chain 128 links long, if you buy a replacement go with the o-rings

JimS · 10-16-2022, 09:47 AM

I'm running this setup on my KPR. $160 shipped including the muffler from eBay was too great of a deal to pass up.

ktmracer358 · 01-08-2023, 03:34 PM

Had some spare time today so I made a laminated quick reference sheet for the bike. probably tape on on the inside of the battery panel, and leave the other one in the tool box

NYC_KPM · 05-31-2023, 09:01 PM

Does anyone know what bike the KPM200 is closest to as far as a replica? I see people saying the Venom Ghost is a Honda CBF for example, the X22 is a ninja, etc. Just wondering what service manual I can get for the KPM200.

**JerryHawk250** · 06-01-2023, 08:08 AM

Quote:

Originally Posted by NYC_KPM

Does anyone know what bike the KPM200 is closest to as far as a replica? I see people saying the Venom Ghost is a Honda CBF for example, the X22 is a ninja, etc. Just wondering what service manual I can get for the KPM200.

I'm sure you could get a service manual from American Lifan. I found the KPR service manual which uses the same engine. https://cdn.shopify.com/s/files/1/02...f?v=1636701098

indus49 · 08-02-2023, 02:18 PM

Just wanted to say, I ended up finding and adding a really nice aftermarket speedo. It came from Amazon: https://www.amazon.com/DKMOTORK-Moto...p/B07WW3L3Y8/r

Attached to my post are the wiring guidelines. Instead of replacing my existing speedo, I created a custom harness to piggyback off the existing speedo. If I had spent a ton more time on the wiring, I probably could have made it work and removed the stock speedo -- but I didn't want to be destructive.

dr99miller · 08-20-2023, 11:25 PM

Great info on the guage cluster install, would love to see it on the bike too!

indus49 · 08-30-2023, 12:07 PM

Quote:

Originally Posted by dr99miller

Great info on the guage cluster install, would love to see it on the bike too!

It's on my new KPM200 Resources site I built:
https://kpm200resources.com/aftermarket-speedometer/

JimS · 09-23-2023, 07:22 PM

It will fit and work but is 1 step hotter than the recommended CPR8EAIX-9

DABBY724 · 09-28-2023, 09:54 PM

Anyone run into an odometer issue with the KPM200? I've only rode about 7-8 miles according to my phone gps but the bike's odometer says I rode 15 miles. That's a huge discrepancy. Any tips on fixing the issue?

KPMnoob · 10-01-2023, 01:32 PM

I just got a KMP 200 from a private seller and think they stripped the oil drain plug. Does anyone have the size/thread specs of the drain plug? I want to try an oversize plug before I have to do the full re-tap of the hole. Has anyone tried this?

DABBY724 · 10-25-2023, 06:50 PM

Apologies for the extremely noob question since this is my first bike ever but my chain keeps loosening over a few days of riding, can anyone give me a solution in preventing that?

dr99miller · 11-22-2023, 11:00 PM

Quote:

Originally Posted by DABBY724

Apologies for the extremely noob question since this is my first bike ever but my chain keeps loosening over a few days of riding, can anyone give me a solution in preventing that?

The stock chain gave me fits, had to replace a lost a tensioner. Got this one from Amazon and haven't had any issues since, even with a larger front sprocket:

https://www.amazon.com/gp/product/B07XLZNYQX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

RobertSX4 · 01-19-2024, 06:36 PM

I am probably early but has anyone identified the measurements of seals needed to rebuild the front forks? Is oil quantity same as the KPR200 even though these forks are inverted?

Bender0vr · 02-09-2024, 03:13 PM

Hello I’m looking for a gasket for the crankcase and everything I find is mislabeled online for other shaped bikes. Anyone know anywhere I can order the gasket that won’t make me wait weeks to receive it?

08-20-2023, 11:25 PM	#7
dr99miller Join Date: May 2020 Location: KOP, PA Posts: 21	Great info on the guage cluster install, would love to see it on the bike too! __________________ 2021 Lifan KPM 200 2019 Venom BD578Z E-Vader
	0

01-19-2024, 06:36 PM	#14
RobertSX4 Join Date: Mar 2022 Location: Hartford, WI Posts: 14	I am probably early but has anyone identified the measurements of seals needed to rebuild the front forks? Is oil quantity same as the KPR200 even though these forks are inverted? __________________ "It's all falling apart like a Chinese motorcycle" - Rodney Dangerfield as Larry Burns 1975 Honda CB750K 1975 Honda CL360 2020 Lifan KPM200
	0

09-10-2022, 11:20 AM	#1
KPM Join Date: Jun 2022 Posts: 21	Post #85 in this thread states what the chain is. The rear sprocket on the 2021 KPM200 has 49teeth on 428 chain, and is off set (dinner plate shaped) so I couldn't find any other sprockets that I could safely switch to. Front sprocket is 16 teeth on 428 chain, this front sprocket has a 20mm shaft hole with 2 bolts and a small gold ring. The chain is 428 chain 128 links long, if you buy a replacement go with the o-rings
	0

10-16-2022, 09:47 AM	#2
JimS Join Date: Jul 2022 Location: New Mexico Posts: 81	I'm running this setup on my KPR. $160 shipped including the muffler from eBay was too great of a deal to pass up.
	1

05-31-2023, 09:01 PM	#4
NYC_KPM Join Date: May 2023 Posts: 4	Does anyone know what bike the KPM200 is closest to as far as a replica? I see people saying the Venom Ghost is a Honda CBF for example, the X22 is a ninja, etc. Just wondering what service manual I can get for the KPM200.
	0

08-02-2023, 02:18 PM	#6
indus49 Join Date: Aug 2022 Posts: 4	Just wanted to say, I ended up finding and adding a really nice aftermarket speedo. It came from Amazon: https://www.amazon.com/DKMOTORK-Moto...p/B07WW3L3Y8/r Attached to my post are the wiring guidelines. Instead of replacing my existing speedo, I created a custom harness to piggyback off the existing speedo. If I had spent a ton more time on the wiring, I probably could have made it work and removed the stock speedo -- but I didn't want to be destructive.
	2

09-23-2023, 07:22 PM	#9
JimS Join Date: Jul 2022 Location: New Mexico Posts: 81	It will fit and work but is 1 step hotter than the recommended CPR8EAIX-9
	1

09-28-2023, 09:54 PM	#10
DABBY724 Join Date: Sep 2023 Posts: 4	Anyone run into an odometer issue with the KPM200? I've only rode about 7-8 miles according to my phone gps but the bike's odometer says I rode 15 miles. That's a huge discrepancy. Any tips on fixing the issue?
	0

10-01-2023, 01:32 PM	#11
KPMnoob Join Date: Oct 2023 Posts: 2	I just got a KMP 200 from a private seller and think they stripped the oil drain plug. Does anyone have the size/thread specs of the drain plug? I want to try an oversize plug before I have to do the full re-tap of the hole. Has anyone tried this?
	0

10-25-2023, 06:50 PM	#12
DABBY724 Join Date: Sep 2023 Posts: 4	Apologies for the extremely noob question since this is my first bike ever but my chain keeps loosening over a few days of riding, can anyone give me a solution in preventing that?
	1

02-09-2024, 03:13 PM	#15
Bender0vr Join Date: Feb 2024 Posts: 2	Hello I’m looking for a gasket for the crankcase and everything I find is mislabeled online for other shaped bikes. Anyone know anywhere I can order the gasket that won’t make me wait weeks to receive it?
	0