11-11-2015, 10:47 PM | #121 |
Join Date: Jul 2010
Posts: 206
|
Is this the one that uses three rivets, rather than screws? If so, you'll have to drill out the rivets. Unless you can loosen the intake boot from carb to engine, and rotate the carb so the float bowl rivets are accesable with a drill, you'll have to remove the carb.
I don't have one, but this is the procedure I think you'll have to do.
__________________
Jon, in Keaau, Hawaii |
|
11-14-2015, 01:06 AM | #122 |
Join Date: Nov 2015
Posts: 44
|
We got them out fine. Had to hit up home Depot for the m4-.7 bolts. Worked great, thanks.
|
|
11-14-2015, 05:56 PM | #123 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Sevndaythry, are you talking about hnu13's post?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
11-14-2015, 06:03 PM | #124 |
Join Date: Nov 2015
Posts: 44
|
Yes, sorry. Prolly should have quoted that.
|
|
11-14-2015, 07:52 PM | #125 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
No worries. Did you find that the float was just stuck?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
11-15-2015, 09:18 AM | #126 |
Join Date: Nov 2015
Posts: 44
|
That seems to be the case. When we finally got the bowl off everything was free and moved fine. I figure it broke loose when we center punched the security bolts for drilling.
|
|
11-17-2015, 09:49 PM | #127 |
Join Date: Oct 2015
Posts: 66
|
Whats the redline on the hawk 250???
|
|
01-25-2016, 02:45 PM | #128 | |
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,107
|
Quote:
|
|
|
01-25-2016, 09:15 PM | #129 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,055
|
I have a feeling this is a pile of 500 bikes, not 500cc engines installed in bikes! Sorry...:(
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
01-26-2016, 12:34 PM | #130 |
Join Date: Oct 2015
Posts: 147
|
70mph
|
|
01-31-2016, 10:38 PM | #133 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,055
|
Please let us know where you find a 44 or 45 tooth rear sprocket for these!
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
02-01-2016, 01:23 AM | #134 |
Join Date: Jan 2016
Location: Portland, OR
Posts: 76
|
What is the mpg like on the Hawk in-city?
|
|
|
|
|
|