|
![]() |
#1 | |
Join Date: May 2024
Location: Florida
Posts: 31
|
Quote:
Yes, I did notice that with mine and I think it just has to do with the front sprocket wobble(which is normal) because I changed over to an RK chain and had the same "problem". |
|
![]() |
![]() |
#2 |
Join Date: Jan 2018
Location: NC
Posts: 219
|
I noticed this also, but when riding down the road and putting throttle to the chain and hence a load on it, it completely goes away and runs smoothly. So, in my case, my rear sprocket is not out of round (I checked), but the countersprocket wobble creates an “out of round” sensation when not under load.
|
![]() |
![]() |
#3 | |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,432
|
Quote:
You said in your post in that Sticky thread with the photos of CRF 250 lowering links (post #60) that you were considering buying one. I assumed that your new Storm 150 DLX has the same link. Why else would you buy one. Then you posted again in the Templar Resource Guide that your rear shock is connected directly to the swingarm. ![]() Huh?? Those two lowering links do appear to be nearly the same dimensions as the OEM Templar X link. The bushing side might be 1mm wider, which could be fabbed in, maybe. The other side seems too wide, and might need to machine the link arms before it would fit on the Templar. I guess cannot test this theory on your Storm 150.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
|
![]() |
![]() |
#4 | |
Join Date: May 2024
Location: Florida
Posts: 31
|
Because I own a Templar. Quote:
I posted again because you seemed lost and confused randomly bringing up a storm 150 in the Templar X resource thread. So I informed you about how it was mounted. |
|
![]() |
![]() |
#5 |
Join Date: May 2021
Posts: 323
|
I haven’t checked yet, but I’ll bet the holes on the sprocket are a bit big for the bolts? Not the hub being out of square…
|
![]() |
![]() |
#6 | |
Join Date: May 2024
Location: Florida
Posts: 31
|
I have a BMS 250, Storm 150 and the Templar X. I am still under the price of a new KLX300 which is rather amazing.
Quote:
I will update the resource thread if one of them ends up fitting. |
|
![]() |
![]() |
#7 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 883
|
Hurry up,need to know.
|
![]() |
|
![]() |
![]() |
|
|