12-14-2014, 04:20 PM | #1051 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I believe Zongshen has taken the Chinese motorcycle industry to a higher level with the new RX3 motorcycle.
Occasionally, people still question the quality of my Zongshen ZS200GY-2. However, after riding it hard for over 67,000 miles, it has never run better. Even if that bike died tomorrow, I can't imagine what it has left to prove.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 12-14-2014 at 05:03 PM. |
|
12-14-2014, 06:14 PM | #1052 |
Join Date: Sep 2014
Location: Blue Ridge Mtns Ga
Posts: 437
|
Hey Spud. I notice you have a FMF silencer on your 200GY. In an effort to reduce weight and sneek a bit more performance out of the RX3 I'm contemplating putting Q4 on the RX3. Just wondering if you've given this any thought.
__________________
Mark 2015 Haosen Hawk 250 2014 CRF250L 2014 CB500X Rally Raid |
|
12-14-2014, 06:22 PM | #1053 | |
Join Date: Sep 2014
Location: Blue Ridge Mtns Ga
Posts: 437
|
Quote:
__________________
Mark 2015 Haosen Hawk 250 2014 CRF250L 2014 CB500X Rally Raid |
|
|
12-14-2014, 06:38 PM | #1054 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
Somewhere down the line I am considering installing this same silencer on my Zongshen RX3. In addition to increased power and lighter weight, I think this silencer will make more room for a larger, right side pannier.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
12-15-2014, 10:50 AM | #1055 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Exactly what I meant. I forgot about your CRF fan switch mod.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-15-2014, 10:54 AM | #1056 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
What does "died" really mean? What could possibly happen that couldn't be fixed by you? Short of a crash, I can't think of anything that could permanently stop the mighty little Zong.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-15-2014, 03:05 PM | #1057 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Let's say the gearbox grenaded itself, such as occurs with the Suzuki DR650 motorcycles. Or maybe the piston could blow a hole, and fuse itself to the cylinder, et cetera. Of course, neither of these things is going to happen, because Zongshen makes good engines. If either of these things did happen, I certainly could fix the problem. However, the naysayers could reasonably state the bike had finally 'died,' and you can only get 67,000 miles out of a 'piece of Chinese junk.'
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 12-15-2014 at 04:51 PM. |
|
12-15-2014, 05:10 PM | #1058 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
The CSC blog reports the company is working on accessories for the RX3.
The crash bars do make an nice platform for auxiliary lighting. SuperBrightLEDs has some nice lighting options as well. https://www.superbrightleds.com/cat/...-light-lights/ I don't know the official output of the RX3 stator. However, looking at photographs of the RX3 stator, and based upon my experience with my ZS200GY-2 stator, I'm confident the power output is good. Nevertheless, I am going to install an H4 LED bulb in the headlight, if it will fit. I really like the LED headlight bulb I installed in my Honda CRF250X. http://www.chinariders.net/showthread.php?t=13947
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-15-2014, 05:42 PM | #1059 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I keep looking for the Motorcycle.com report on the test ride of the Zongshen RX3 they conducted last Thursday. These guys do excellent, fair reports. I wonder what they will say regarding the 250cc RX3 versus the 650cc adventure bikes.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-15-2014, 07:21 PM | #1060 | |
Join Date: Sep 2014
Posts: 175
|
Quote:
|
|
|
12-15-2014, 09:22 PM | #1061 |
Join Date: Sep 2014
Posts: 247
|
Handguards? Did someone say handguards?
|
|
12-15-2014, 09:40 PM | #1062 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
I need to verify the LED bulb has enough clearance to fit behind the headlight shroud. If it fits, I am definitely going to install it.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
12-16-2014, 12:35 AM | #1063 |
Join Date: Sep 2014
Posts: 175
|
Check into Highway Dirt Bike handguards. It's what I'm putting on my RX-3.
http://www.highwaydirtbikes.com/HDB_...lay&ref=splash |
|
12-16-2014, 04:22 AM | #1064 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
When the Honda CB300F was announced earlier this year, I immediately liked the motorcycle. However, given a choice between the Honda CB300F and the Zongshen RX3, I would rather own the RX3. I don't want to be limited to riding on pavement, and the RX3 is certainly much more capable for off road riding than the CB300F. Both engines make about the same horsepower. However, the RX3 comes complete with touring/adventure equipment, and has a better suspension. If you add in the perimeter frame and stronger sub-frame for weight bearing capacity, as well as the windshield, 4.2-gallons of fuel, panniers, et cetera, the RX3 really doesn't weigh much more than the CB300F, or the CRF250L, for that matter.
As far as functionality is concerned, I think the Zongshen RX3 is located midway between the street-oriented CB300F, and the more dirt-oriented CRF250L. You can't make the CB300F perform as well in the dirt as the RX3, and you can't make the CRF250L perform as well in adventure mode as the RX3. Neither Honda has the adventure equipment, let alone the sub-frame required, to match the load capacity of the RX3. I like the Honda CRF250L very much, but it is too heavy for a dirt bike. I already own a Honda CRF250X, so I don't want to be saddled with an extra 47 pounds of weight while riding off road. If you try to equip the CRF250L with the same luggage, et cetera, as the RX3, you will quickly match the weight of the RX3, but you wouldn't match either the weight bearing capacity, nor the price of the RX3. The Zongshen RX3 fits a perfect niche for me.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-16-2014, 04:48 AM | #1065 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
It just occurred to me; Motorcycle.com probably won't be comparing the Zongshen RX3 to the 650cc adventure bikes. They will probably compare the RX3 to the other, 250cc, dual sport bikes. Roughly arranged from the most dirt-capable bike, to the most street-capable motorcycle, here is the 250cc lineup.
Yamaha WR250R Kawasaki KLX250S Yamaha XT250 Honda CRF250L Zongshen RX3 The price range also roughly follows the same sequence, from the most expensive bike, to the least expensive motorcycle. Anticipating the upcoming ride review, and a possible, future, dual sport shootout, here is the Motorcycle.com video comparison of the Kawasaki KLX250S versus the Honda CRF250L.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|