Camper/Toyhauler Conversion - Page 5

**JerryHawk250** · 02-23-2022, 02:10 PM

It's been a while since we've done anything to the camper between hurricane repairs and just being plain busy playing music now that things are getting back to almost normal. So over the weekend I build another fold up bed. We're spending the weekend down at the marina playing music and will be bring the camper to sleep in instead of driving back a forth. It's a good hours drive and don't feel like driving back home @ 2am in the morning.

**JerryHawk250** · 04-05-2022, 03:10 PM

Two weekends ago I installed a fold down table. My awning came in today so I'll have to find time to install it. After that it's paneling on the walls then the floors. The end is near.

**JerryHawk250** · 04-05-2022, 05:37 PM

Here's a few picture from two weekends ago. We had a gig at one of the campgrounds. The place is called Paradise Ranch https://paradiseranchrv.com/attractions/ . There are Red Stage Deer that walk the entire campground. We have to go back in June and a couple more times this year to play. Best part is we have free access to the entire campground including Golf Carts.

wheelbender6 · 04-05-2022, 09:54 PM

You've built a real kicka$$ real man rig Jerry!
That MS park sounds great. Not too far from my in-laws.
Thanks for the link.

**JerryHawk250** · 04-05-2022, 10:48 PM

Quote:

Originally Posted by wheelbender6

You've built a real kicka$$ real man rig Jerry!
That MS park sounds great. Not too far from my in-laws.
Thanks for the link.

Thanks

We'll be back there on the weekend for June 11th. You might have to make a visit to the in laws .

**JerryHawk250** · 04-18-2022, 09:35 AM

Update: Got the awning installed on Saturday while I had some friends over to help. It was much easier than I thought it would be.

**JerryHawk250** · 10-27-2022, 02:26 PM

I have not completed my conversion. I still have floors and walls to finish. The Hurricane had kind of put a halt to finishing it out for now but still usable. eventually I'll get it completed once we finish making hurricane repairs around the house. Here's a little picture video on where I'm at right now.

**JerryHawk250** · 01-07-2024, 07:41 PM

Well after putting everything on hold because of COVID and the hurricane, I finally put flooring in the camper.

**JerryHawk250** · 01-26-2024, 03:42 PM

I installed rubber flooring in the garage bay of the camper last Saturday. Tomorrow I start on finishing the walls. I want to get everything finished up by the end of February if not sooner.

**JerryHawk250** · 01-28-2024, 11:07 AM

I got a little more done yesterday even though my back was aching. Beaded board on the kitchen walls.

**JerryHawk250** · 01-28-2024, 08:55 PM

I did some more work on the camper this afternoon. Built an entertainment center over the wheel well. The TV will be wall mounted. I'll probably put beaded board over the cabinet the width of the top.

**JerryHawk250** · 02-03-2024, 04:11 PM

It's been pouring down raining all day. I pulled the awning out so I'll have a halfway dry place to set up the saw. I installed beaded board over the entertainment center. I even managed to get two coats of polyurethane on it. I had the heater running to help with the drying.

**JerryHawk250** · 02-04-2024, 06:48 PM

Built three cabinet doors this morning and installed the TV wall bracket.

dirtbkr188 · 02-04-2024, 08:01 PM

Soooo....you hung up the small tv to emphasize to the Missus how much better a bigger screen tv would look, correct?...

**JerryHawk250** · 02-04-2024, 08:18 PM

I didn't want to hide all that beautiful wood work I did. Lol

04-05-2022, 09:54 PM	#64
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	You've built a real kicka$$ real man rig Jerry! That MS park sounds great. Not too far from my in-laws. Thanks for the link. __________________ "Its not WHAT you ride; its THAT you ride"
	1

10-27-2022, 02:26 PM	#67
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	I have not completed my conversion. I still have floors and walls to finish. The Hurricane had kind of put a halt to finishing it out for now but still usable. eventually I'll get it completed once we finish making hurricane repairs around the house. Here's a little picture video on where I'm at right now. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	4

01-07-2024, 07:41 PM	#68
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	Well after putting everything on hold because of COVID and the hurricane, I finally put flooring in the camper. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	6

01-26-2024, 03:42 PM	#69
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	I installed rubber flooring in the garage bay of the camper last Saturday. Tomorrow I start on finishing the walls. I want to get everything finished up by the end of February if not sooner. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

01-28-2024, 11:07 AM	#70
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	I got a little more done yesterday even though my back was aching. Beaded board on the kitchen walls. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

01-28-2024, 08:55 PM	#71
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	I did some more work on the camper this afternoon. Built an entertainment center over the wheel well. The TV will be wall mounted. I'll probably put beaded board over the cabinet the width of the top. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

02-03-2024, 04:11 PM	#72
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	It's been pouring down raining all day. I pulled the awning out so I'll have a halfway dry place to set up the saw. I installed beaded board over the entertainment center. I even managed to get two coats of polyurethane on it. I had the heater running to help with the drying. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

02-04-2024, 06:48 PM	#73
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	Built three cabinet doors this morning and installed the TV wall bracket. Attached Thumbnails __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

02-04-2024, 08:01 PM	#74
dirtbkr188 Join Date: Aug 2009 Posts: 574	Soooo....you hung up the small tv to emphasize to the Missus how much better a bigger screen tv would look, correct?...
	1

02-04-2024, 08:18 PM	#75
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	I didn't want to hide all that beautiful wood work I did. Lol __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0