Go Back   ChinaRiders Forums > General > Riding > Ride Suggestions
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 10-22-2019, 01:07 AM   #61
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Quote:
Originally Posted by dh View Post
I knew it was time to do front brake pads but I pushed things too far and the front rotor is absolutely destroyed now. I have extra pads laying around so I thought I would just throw some on in the meantime, and stripped one of the caliper bolts in the process of rushing things with the impact driver. I have a spare caliper but no spare rotor (the bad one was new last year)

Out of habit I immediately ordered the new rotor on Taobao, although I probably should have ordered through SSR which would be way faster. Taobao usually estimates 25-60 days but I have received parts in 1-2 weeks in some cases. Hopefully the Chinese postal service can work some miracles for me!
Well its better that it happened at home and not on the trail. The guy on youtube demoing a Brozz lost a caliper bolt and rode back to his truck carrying his caliper over the handlebars.


 
Reply With Quote
Old 10-22-2019, 12:42 PM   #62
alex_in_az   alex_in_az is offline
 
Join Date: Aug 2013
Location: Goodyear, Arizona
Posts: 412
Quote:
Originally Posted by Musictrek View Post
Well its better that it happened at home and not on the trail. The guy on youtube demoing a Brozz lost a caliper bolt and rode back to his truck carrying his caliper over the handlebars.
well, I think I know what I'm doing this weekend
__________________
2020 Tao TBR7
9.3:1 PnP head
CRF230F exhaust
4 degree advance key
290 degree cam
Nibbi PE30 and cone filter

Front fork brace


 
Reply With Quote
Old 10-22-2019, 01:53 PM   #63
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,723
Quote:
Originally Posted by Musictrek View Post
Well its better that it happened at home and not on the trail. The guy on youtube demoing a Brozz lost a caliper bolt and rode back to his truck carrying his caliper over the handlebars.
I had that happen last year while out riding in the spillway. I was lucky. We had stopped and my daughter got out her UTV and picked something up. She walked up to me with a bolt in her hand and asked me "what you think this is for?" I didn't know so put it in my pocket. When I rode back to the parking lot the brakes felt funny. When I looked down at the front brake I noticed the bolt missing.
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 10-22-2019, 04:46 PM   #64
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Quote:
Originally Posted by JerryHawk250 View Post
I had that happen last year while out riding in the spillway. I was lucky. We had stopped and my daughter got out her UTV and picked something up. She walked up to me with a bolt in her hand and asked me "what you think this is for?" I didn't know so put it in my pocket. When I rode back to the parking lot the brakes felt funny. When I looked down at the front brake I noticed the bolt missing.
the needle in the haystack daughter has good eyes.


 
Reply With Quote
Old 10-22-2019, 04:50 PM   #65
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,723
Quote:
Originally Posted by Musictrek View Post
the needle in the haystack daughter has good eyes.
Yeah, I know. What's the chance of finding that bolt on a trail in the mud and sand?
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 10-22-2019, 09:00 PM   #66
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
Hehe

Quote:
Originally Posted by alex_in_az View Post
What a re we doing for things like tools, spare parts etc? The one thing that scares me is running over a cholla or similar and getting a flat. Does the green slime stuff work at all or am I over thinking this?
I will not have a bike for the ride, but should have my son's Tacoma. I am not sure about if I have tie-downs and I know I do not have a pickup truck ramp to roll bikes on or off, so if someone can bring those just in case we need them, we can have me as a backup truck. Throw all spare parts in the back of the truck.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 10-23-2019, 03:16 PM   #67
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Quote:
Originally Posted by JerryHawk250 View Post
Yeah, I know. What's the chance of finding that bolt on a trail in the mud and sand?
Only with a metal detector!


 
Reply With Quote
Old 10-23-2019, 10:38 PM   #68
Emerikol   Emerikol is offline
 
Join Date: Oct 2016
Location: Carrollton, GA
Posts: 1,467
Just a thought to throw out there. For everyone that's going on this ride, it might be a really good idea to write down an emergency contact or two on a sheet of paper. We can swap them around, or maybe designate someone that's bringing more than two wheels to keep them safe. That way if something bad happens we have a way of getting in touch with the important people. I'm bringing a riding buddy who I've known for a coupe years, and he already has phone numbers for my wife and family. Just a bit of preparedness I'd like to throw out there. I'll also have some tools, a tire patch kit, and an air compressor, just in case.
__________________
First Rule of Aviation:
-Never Pass Up The Opportunity to Pee

I was struggling to get my wife's attention; I sat down on the couch and looked comfortable. That did the trick!

My wife says I only have two faults. I don't listen and something else...

If at first you don't succeed, try doing it the way I told you to...

The Stable:
2005 Yamaha V-Star 650 - SOLD
2015 Suzuki DR 650
2015 RPS Hawk 250 - SOLD
2016 Ural Gear Up


 
Reply With Quote
Old 10-26-2019, 02:19 AM   #69
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Quote:
Originally Posted by Emerikol View Post
Just a thought to throw out there. For everyone that's going on this ride, it might be a really good idea to write down an emergency contact or two on a sheet of paper. We can swap them around, or maybe designate someone that's bringing more than two wheels to keep them safe. That way if something bad happens we have a way of getting in touch with the important people. I'm bringing a riding buddy who I've known for a coupe years, and he already has phone numbers for my wife and family. Just a bit of preparedness I'd like to throw out there. I'll also have some tools, a tire patch kit, and an air compressor, just in case.
That's a good idea and just incase someone takes a wrong turn. There will be many ways to go on this trail. My plan is we stick together on the ride to avoid any wrong turns.


 
Reply With Quote
Old 11-01-2019, 11:28 AM   #70
dh   dh is offline
 
Join Date: Jun 2014
Location: NW Arkansas
Posts: 454
Quote:
Originally Posted by Musictrek View Post
Well its better that it happened at home and not on the trail. The guy on youtube demoing a Brozz lost a caliper bolt and rode back to his truck carrying his caliper over the handlebars.

Very good point! All the parts came in on Monday and I got excited, until I realized the new front rotor I ordered doesn't fit. I did some homework and learned I have 2 rotors for the next gen XF250 which uses a larger 290mm rotor . Now it's at the dealership, they say it might be ready next week.
__________________
2013 SSR XF-250


 
Reply With Quote
Old 11-02-2019, 03:07 PM   #71
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Well its one week away from the ride! The weather today is just perfect if it was today it would be just as good.


 
Reply With Quote
Old 11-02-2019, 03:09 PM   #72
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Final one week away meeting location. I will get to the location at 9am


Hello all that want to ride the ride to Wickenburg Nov 9th. Here is the staging area on the map attached. The temps last year were really good last year. So, riders meet at the staging location at 9am and we will start the ride at 9:30am. The staging location is right off of Sun Valley Parkway which is basically bell rd.
33°39'40.95"N
112°31'45.81"W
Just right before outside of town in Surprise there is a place called Riverboat Casino which is on bell rd. From that location driving west on bell go about 5 miles to the turn off to the staging location. Estimated time for the ride is 2 to 2 1/2hrs one way. We can end for lunch at the Hamburger joint called Screamers drive in and check out the town if those want to. If those want to check out the vulture mine on the way back that is also an option. This will be a long ride and when I got home last time I got a good nap!


 
Reply With Quote
Old 11-02-2019, 07:25 PM   #73
NzBrakelathes   NzBrakelathes is offline
 
NzBrakelathes's Avatar
 
Join Date: Jun 2016
Location: Hell
Posts: 2,408
I’ll be there n I have some free gifts and a few products too if interested etc


 
Reply With Quote
Old 11-02-2019, 08:15 PM   #74
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
Quote:
Originally Posted by Musictrek View Post
Final one week away meeting location. I will get to the location at 9am
The staging location is right off of Sun Valley Parkway which is basically bell rd.
33°39'40.95"N
112°31'45.81"W
Just right before outside of town in Surprise there is a place called Riverboat Casino which is on bell rd. From that location driving west on bell go about 5 miles to the turn off to the staging location.
Sun Valley and N. 219th Ave. correct? The coordinates on Google Maps show it as 'right there' off of Sun Valley. Maps shows the best route for me (coming from Gila Bend up 85) as going on I 10 east for a couple miles and taking Sun Valley and then looping around. easy peasy!!
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 11-03-2019, 12:41 AM   #75
Musictrek   Musictrek is offline
 
Musictrek's Avatar
 
Join Date: Jan 2017
Location: Arizona
Posts: 463
Quote:
Originally Posted by culcune View Post
Sun Valley and N. 219th Ave. correct? The coordinates on Google Maps show it as 'right there' off of Sun Valley. Maps shows the best route for me (coming from Gila Bend up 85) as going on I 10 east for a couple miles and taking Sun Valley and then looping around. easy peasy!!
That is correct. The turn off is off of Sun Valley Parkway which turns into bell road the further east you go.


 
Reply With Quote
Reply

Tags
250, wickenburg



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:00 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.